Jump to content
  • Welcome to the TransPulse Forums!

    We offer a safe, inclusive community for transgender and gender non-conforming folks, as well as their loved ones, to find support and information.  Join today!

Another Project to Keep Me Busy


Robin.C

Recommended Posts

Here we go again as they say. I obviously don't have enough other things to occupy my mind, transition and all.

Therefore I have decided to try my hand at building a bass guitar.

Being my first try at this sort of thing I've had to make some decisions based on cost availability and time factors.

As the photo shows its a sort of Hofner 500/1 Beatle Bass. Sort of ?

It's a short scale not medium, it's MDF semi-hollow not hollow and it will be PJ pickups not humbuckers.

Will it be any good? I don't know. If it makes a noise sort of like a bass guitar I'll call that a win and then maybe I'll make a better one ?

 

Enjoy

Hugs

Robin

Bass Guitar.jpg

Link to comment
  • Replies 107
  • Created
  • Last Reply

Top Posters In This Topic

  • Robin.C

    46

  • Jani

    24

  • Charlize

    13

  • Cyndee

    6

Top Posters In This Topic

Posted Images

  • Forum Moderator

It certainly looks like your getting a good start.  Hopefully you will share some pictures with us as you make progress.

 I have found a great deal of satisfaction in making things that require mind and  hand work.  I've only made two instruments while working at home.  Both were dulcimers.  I steamed the sides on one and built the others sides up using verniers.  It is such fun to hear sound coming from your creation!  Enjoy.

 

Hugs,

 

Charlize

Link to comment
  • Forum Moderator

I'm having a left handed Rickenbacker bass made for me.... here is the progress.....

 

Image previewImage previewImage preview

Link to comment
  • Forum Moderator

Good luck with the guitars. I always found the basic physical construction of them a bit of a black art as, although matehematically the scales size could be correct, the fine tuning could still seem wrong. A point to beware of is the neck / body joint as there is a lot of stress. I remember on cheap Fender copies the neck could readily be pulled back and forth so behaving like a tremelo arm with the sound. My forte was really limited to a bit of fretwork and swopping pickups / machine heads. It's some years since I did anything with them now though.

 

It would be good to see the Rickenbacker (it does not show for me either).  I always liked them although I never played one.

 

Tracy

Link to comment
  • 3 weeks later...

Here we go setting out stuff. The fun thing was I had to adjust the tailpiece coz it wasn't straight.

A hacksaw and file fixed it though.

Then I found out the strings I bought are too long for short scale neck I'm using. If I was building a proper Hofner 500/1 the medium scale strings would be okay, short scale not so.

For those musicians amongst us, they are Rotosound RS66S. They look and feel nice by the way.

I also have given up on the P/J pickups as they are too big to fit in the area I have available. So ordered a set of mini Humbuckers. Which also leads to the issue I now need to build a control setup. I've downloaded some Hofner schematics and going to try and make something that will work I hope.

 

Oh yeah the cutters for the router have arrived and they are too small to work. Dang it.  Ah well just order some more right. Yep. Now to wait again. Building custom stuff is so time consuming, fun though.

 

I hope you'all like the progress such as it is.

 

Hugs

Robin

 

 

For TP Body_3.jpg

Link to comment
  • Forum Moderator
On 8/28/2021 at 1:55 PM, Robin.C said:

 

I hope you'all like the progress such as it is.

 

 

We do,

 

Fun to follow along with your post as it's being created. 

 

Hugs,

 

C

Link to comment
  • Forum Moderator

@Robin.C excellent work. I have a left handed hofner and a luthier is building me a left handed Rickenbacher Bass GetAttachmentThumbnail?id=AQMkADAwATZiZmYAZC04YzU5LTdiNjAtMDACLTAwCgBGAAAD3k3Id2fgOU%2BF%2F5pknHlF4wcAxvTVbfW3wEyfxnslRZX1UgAAAgEJAAAAxvTVbfW3wEyfxnslRZX1UgAEm06eyQAAAAESABAAdcrvxjEJPEu9CMqpB7Mn1Q%3D%3D&thumbnailType=2&isc=1&token=eyJhbGciOiJSUzI1NiIsImtpZCI6IjMwODE3OUNFNUY0QjUyRTc4QjJEQjg5NjZCQUY0RUNDMzcyN0FFRUUiLCJ0eXAiOiJKV1QiLCJ4NXQiOiJNSUY1emw5TFV1ZUxMYmlXYTY5T3pEY25ydTQifQ.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.lapRZ0Zo_65-dyC9rJree_s5DWnvQQ_n64io1RAkSNz8iK4fU0mpjo5ZEZ02-XNNDVOiqPN8vRWhAioSXM8u4QDAswhj4wnY4rp_5T-6iYjB467GUq5mZwSwjYWBuP4W7b2BbBn_gUm8XIGv6oPYigu0m_E8js8QGvCmyjqOqX-GXhjWlalTG1YieZOey-MBceWco8pPLfakQKV_0a-rwWtb67aAnr_KjNXl5pKm5TQJzjfZ2I1Yxg1V8ZYA63NtnM0LyVysiMALJQia774LBd2_-RU70RpZfTQ2LCNGoIIyOdJWrj2zKlNaz_N7qEQKSKTW6iCBv9npWsdlaCLPjQ&X-OWA-CANARY=NC4u0tiLgUiv6l6aK3uxIoARMKDJa9kYrElLqDdoZHJ5tntsay9mqjnYdHXEZXXSWSYcyvcGpx0.&owa=outlook.live.com&scriptVer=20210823004.04&animation=trueGetAttachmentThumbnail?id=AQMkADAwATZiZmYAZC04YzU5LTdiNjAtMDACLTAwCgBGAAAD3k3Id2fgOU%2BF%2F5pknHlF4wcAxvTVbfW3wEyfxnslRZX1UgAAAgEJAAAAxvTVbfW3wEyfxnslRZX1UgAEm06eyQAAAAESABAA%2BquM6T2LFUm1pcadHIes7g%3D%3D&thumbnailType=2&isc=1&token=eyJhbGciOiJSUzI1NiIsImtpZCI6IjMwODE3OUNFNUY0QjUyRTc4QjJEQjg5NjZCQUY0RUNDMzcyN0FFRUUiLCJ0eXAiOiJKV1QiLCJ4NXQiOiJNSUY1emw5TFV1ZUxMYmlXYTY5T3pEY25ydTQifQ.eyJvcmlnaW4iOiJodHRwczovL291dGxvb2subGl2ZS5jb20iLCJ1YyI6IjFiOWFmNzJlMmVjZTQ2ZDg4YjdjYjNhNjg3Mjk2OWE1IiwidmVyIjoiRXhjaGFuZ2UuQ2FsbGJhY2suVjEiLCJhcHBjdHhzZW5kZXIiOiJPd2FEb3dubG9hZEA4NGRmOWU3Zi1lOWY2LTQwYWYtYjQzNS1hYWFhYWFhYWFhYWEiLCJpc3NyaW5nIjoiV1ciLCJhcHBjdHgiOiJ7XCJtc2V4Y2hwcm90XCI6XCJvd2FcIixcInB1aWRcIjpcIjE4OTk5NDU1NjI1Njk1NjhcIixcInNjb3BlXCI6XCJPd2FEb3dubG9hZFwiLFwib2lkXCI6XCIwMDA2YmZmZC04YzU5LTdiNjAtMDAwMC0wMDAwMDAwMDAwMDBcIixcInByaW1hcnlzaWRcIjpcIlMtMS0yODI3LTQ0MjM2NS0yMzU0Njc0NTI4XCJ9IiwibmJmIjoxNjMwMzM2NzEwLCJleHAiOjE2MzAzMzczMTAsImlzcyI6IjAwMDAwMDAyLTAwMDAtMGZmMS1jZTAwLTAwMDAwMDAwMDAwMEA4NGRmOWU3Zi1lOWY2LTQwYWYtYjQzNS1hYWFhYWFhYWFhYWEiLCJhdWQiOiIwMDAwMDAwMi0wMDAwLTBmZjEtY2UwMC0wMDAwMDAwMDAwMDAvYXR0YWNobWVudC5vdXRsb29rLmxpdmUubmV0QDg0ZGY5ZTdmLWU5ZjYtNDBhZi1iNDM1LWFhYWFhYWFhYWFhYSIsImhhcHAiOiJvd2EifQ.lapRZ0Zo_65-dyC9rJree_s5DWnvQQ_n64io1RAkSNz8iK4fU0mpjo5ZEZ02-XNNDVOiqPN8vRWhAioSXM8u4QDAswhj4wnY4rp_5T-6iYjB467GUq5mZwSwjYWBuP4W7b2BbBn_gUm8XIGv6oPYigu0m_E8js8QGvCmyjqOqX-GXhjWlalTG1YieZOey-MBceWco8pPLfakQKV_0a-rwWtb67aAnr_KjNXl5pKm5TQJzjfZ2I1Yxg1V8ZYA63NtnM0LyVysiMALJQia774LBd2_-RU70RpZfTQ2LCNGoIIyOdJWrj2zKlNaz_N7qEQKSKTW6iCBv9npWsdlaCLPjQ&X-OWA-CANARY=NC4u0tiLgUiv6l6aK3uxIoARMKDJa9kYrElLqDdoZHJ5tntsay9mqjnYdHXEZXXSWSYcyvcGpx0.&owa=outlook.live.com&scriptVer=20210823004.04&animation=trueGetAttachmentThumbnail?id=AQMkADAwATZiZmYAZC04YzU5LTdiNjAtMDACLTAwCgBGAAAD3k3Id2fgOU%2BF%2F5pknHlF4wcAxvTVbfW3wEyfxnslRZX1UgAAAgEJAAAAxvTVbfW3wEyfxnslRZX1UgAEm06eyQAAAAESABAAiTH102xKkEKEAeX9n3R%2Bbg%3D%3D&thumbnailType=2&isc=1&token=eyJhbGciOiJSUzI1NiIsImtpZCI6IjMwODE3OUNFNUY0QjUyRTc4QjJEQjg5NjZCQUY0RUNDMzcyN0FFRUUiLCJ0eXAiOiJKV1QiLCJ4NXQiOiJNSUY1emw5TFV1ZUxMYmlXYTY5T3pEY25ydTQifQ.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.lapRZ0Zo_65-dyC9rJree_s5DWnvQQ_n64io1RAkSNz8iK4fU0mpjo5ZEZ02-XNNDVOiqPN8vRWhAioSXM8u4QDAswhj4wnY4rp_5T-6iYjB467GUq5mZwSwjYWBuP4W7b2BbBn_gUm8XIGv6oPYigu0m_E8js8QGvCmyjqOqX-GXhjWlalTG1YieZOey-MBceWco8pPLfakQKV_0a-rwWtb67aAnr_KjNXl5pKm5TQJzjfZ2I1Yxg1V8ZYA63NtnM0LyVysiMALJQia774LBd2_-RU70RpZfTQ2LCNGoIIyOdJWrj2zKlNaz_N7qEQKSKTW6iCBv9npWsdlaCLPjQ&X-OWA-CANARY=NC4u0tiLgUiv6l6aK3uxIoARMKDJa9kYrElLqDdoZHJ5tntsay9mqjnYdHXEZXXSWSYcyvcGpx0.&owa=outlook.live.com&scriptVer=20210823004.04&animation=true

Link to comment

I'll be watching your progress.  If you have any hiccups or want to bounce ideas around, I've built a few instruments over the years..built this one a few years ago and it's been my daily player ever since.. wife did the art

.20180831_104713.thumb.jpg.8ad92328d4ee6ed7ef21d0538220f384.jpg

Link to comment
4 hours ago, PrincipalGeek said:

I'll be watching your progress.  If you have any hiccups or want to bounce ideas around, I've built a few instruments over the years..built this one a few years ago and it's been my daily player ever since.. wife did the art

.

That's a very nice bass ❤️

Have you ever tried to paste artwork onto a curved body ? I have an idea for artwork, which I want to print and then try to glue onto the curved surface and then clear coat.

Also how wide is the nut (43mm ?, oops 1.69" ). I wanted to get the tuners/machine heads straight inline with the strings like you have there, though I was hoping to get them level rather than offset like you have.

 

I might have to put up a picture showing the difference in the body I've designed compared to a proper 500/1. ?

 

@Cyndee thank you ?

 

Hugs

Robyn

Link to comment
16 hours ago, Robin.C said:

That's a very nice bass ❤️

Have you ever tried to paste artwork onto a curved body ? I have an idea for artwork, which I want to print and then try to glue onto the curved surface and then clear coat.

Also how wide is the nut (43mm ?, oops 1.69" ). I wanted to get the tuners/machine heads straight inline with the strings like you have there, though I was hoping to get them level rather than offset like you have.

 

I might have to put up a picture showing the difference in the body I've designed compared to a proper 500/1. ?

 

@Cyndee thank you ?

 

Hugs

Robyn

 

That particular art was done on heavy watercolor paper and glued to the bass.  Never tried, curved.  I wonder if there's any sort of flexible plastic that can take ink from a printer?  That would might be the best bet.  I'll ask my wife and post back to this thread if she knows of anything suitable.

 

As far as my nut size, that's kind of a personal question (ba dum-chss)!  The nut on that bass is 38mm, the nut on my Ibanez acoustic is 43mm (attached pic of that).   If you need precise spacing/measurements for reference, let me know.. I just eyeballed those with a ruler, I'll get out the caliper is you need better.

 

Would love to see a 'side by side' comparison.  I've sort of wanted a violin body bass, but not enough to buy or build one.... only so much room ?

P8310004.JPG

Link to comment

My wife just passed this info on.  This is a printing service, however it may be possible to acquire similar materials for do-it-yourself:

 

 

Laminated Poster might be a good option
https://smartpress.com/offering/large-poster-printing

 

Or more expensive but you can get it precut to shape and pre-sticky,
floor vinyl in particular is probably very durable...
floor vinyl https://smartpress.com/offering/floor-graphic-printing

 

or wall vinyl https://smartpress.com/offering/wall-decal

 

or vinyl banner (not sticky or cut to shape, but cheaper) https://smartpress.com/offering/hanging-banners

 

if 24 x 18 is big enough this print/coating sample sheet you can get in
"synthetic paper" which is plastic https://smartpress.com/offering/print-coating-sample-sheet

 

Link to comment

@PrincipalGeek thank you fort the information. I will give the glued paper method and see if i can get it to do a gentle curve. Sort of like steaming wood.

 

I have done a similar thing on a much large scale on the my rocker plate below. It was flat though.

 

Hugs

Robin

20200615_160355.jpg

Link to comment

This a s good a comparison as I can do, not owning a Hofner bass an all.

So if the photo orients properly then the one at the top is the full size Hofner body and the bottom one is what I have made to fit the short 25.5" scale neck. I wanted the proportions a little bit more in keeping with the short scale and smaller, bridge and pickups.

 

Hope this helps a bit with understanding what I'm trying to achieve, if it even works at all.

 

This weeks drum homework is get Michael Jacksons Beat It into at least some sort of recognizable form.

Wish me luck ?

 

Hugs

Robin

 

Hofner vs Wonky Duck.jpg

Link to comment

Nice, the smaller body should be easier to get around if working higher up the strings as well. 

 

Good luck on the drum work!  And the project bass!

Link to comment
  • 2 weeks later...

Woo hoo, so here is the next update in the saga that is guitar making.

Soooo ... got some okay double-sided tape to hold things together while routering. Packaging says to leave for 48hrs for maximum bond ... really !!?? It was difficult enough after 2 hours !!

Cutting the bodies turned out to be quite easy, though I may end up having to cut some more pieces unless i can hide the jigsaws undercut. Jigsaw blades can bend a long way in 16mm MDF.

So I have all the main parts to do the layout and get the scale length correct, set the pickups at the correct-ish 60s intonation lengths.

New short scale strings have arrived so i can do the tuners when i get to that end. Though I have had to order an new nut as the one with the neck was for a 6-string guitar.

 

Let's see all the electronics are on their way across the waters to our fair isle. Got the audio pots and the slide switches should arrive next week. I'm going to prototrype various control circuits and see which i like the best, including the original style Hofner setup.

 

I think that's all for the moment.

Oh almost forgot now I have the pickups and saddles I can make a template for the neck pocket and the internal hollowing to lighten it up and add some sort of resonance, it will be interesting to see what a semi-hollow body sounds like.

 

Until then,

 

Hugs

Robin

For TP Cutting body.jpg

For TP double sided tape.jpg

For TP removing Double sided tape.jpg

For TP Setout.jpg

Link to comment
  • Forum Moderator

It is certainly becoming on nicely.  It sounds like you are enjoying the challenge without a note sounding.  

That is a lot of progress from some paper templates!

 

Hugs,

 

Charlize

Link to comment
  • Forum Moderator

What a beauty pre-born instrument. My new left handed hand made Ricky bass sounds so sweet and it's second appearance in public is tonight.

Link to comment
  • 2 weeks later...

This was one of the most nerve racking parts of the build so far. Would I stuff this up and then need to wait 3 months for another neck to be shipped or would I get it pretty okay !?

Spoiler Alert .. pretty okay ?

The picture tells a thousand words, as long as you don't use a word count program.

It is a bit difficult to see in the last photo, however the strings will all end up in a straight line, nothing bent here .... LOL.

The electronics have arrived and the rest of the stuffs to make the control circuit, so that's next.

 

I hope this finds everyone doing well. Some of you will have noticed me missing from a few things. Work, garden and house have been crazy busy the last few weeks and the guitar was a way of looking after my mental health and just disappearing into the garage for a couple of hours.

 

Stay safe.

Hugs

Robyn

Sep2021_002_TP Finished Cutting.jpg

Sep2021_001_TP Marking Out.jpg

Sep2021_003_TP Tuners Front.jpg

Sep2021_004_TP Tuners Rear.jpg

Sep2021_005_TP Straight Strings.jpg

Link to comment
  • Forum Moderator

I like the shape.  Is there a particular reason you made the stem of the neck so long?  (from the tuning keys to nut)

 

Link to comment

@Jani it has ended up so long in the head area due to the crazy short scale 25.5" ... I wanted to use these really nice Rotosound strings and they are fairly long before the silk winding blue bit, so it sort of forced me to move things far away .. ?

I'm hoping that it will also help with the balance a bit.

I am sorting out ways to hollow out the MDF without ruining the structural integrity of the body and still be able to shield all the electrical bittys. Conductive paints seems to be my best option at the moment. 

Maybe I should call it my Giraffe Bass ?

 

Hugs

Robin

Link to comment

That’s a very cool project. I didn’t realize how many bass players are on this forum  (actually I play multiple instruments, and it seems that is not uncommon here either, I just have an affinity for bass guitar). I am in awe you are building this…I don’t even have the skills to adjust the action on the two basses I have. 

Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Who's Online   7 Members, 0 Anonymous, 120 Guests (See full list)

    • Abigail Genevieve
    • MaeBe
    • Petra Jane
    • RaineOnYourParade
    • KathyLauren
    • April Marie
    • EasyE
  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    • Total Topics
      80.6k
    • Total Posts
      768.2k
  • Member Statistics

    • Total Members
      12,020
    • Most Online
      8,356

    Tami
    Newest Member
    Tami
    Joined
  • Today's Birthdays

    1. Bebhar
      Bebhar
      (41 years old)
    2. caelensmom
      caelensmom
      (40 years old)
    3. Jani
      Jani
      (70 years old)
    4. Jessicapitts
      Jessicapitts
      (37 years old)
    5. klb046
      klb046
      (30 years old)
  • Posts

    • April Marie
      So many things become easier when you finally turn that corner and see "you" in the mirror. Shedding the guilt, the fear, the questioning becomes possible - as does self-love - when that person looking back at you, irrespective of what you're wearing, is the real you.   I am so happy for you!! Enjoy the journey and where it leads you.
    • MaeBe
      I'm sure even the most transphobic parents would, too. What does it hurt if a child socializes outside of their family in a way that allows them to understand themselves better? I have encountered a handful of kids do the binary, non-binary, back to binary route and they got to learn about themselves. In the end, there may have been some social self-harm but kids are so darned accepting these days. And really, schools aren't policing pronouns, but the laws that are coming out are making them do so--and in turn requiring a report to a parent that may cause some form of harm to the child.   If the kid wants to lie to, or keep secrets from, their parents about their gender expressions, what does it say about the parents? Perhaps a little socialization of their thoughts will give them the personal information to have those conversations with them? So when they do want to have that conversation they can do so with some self-awareness. This isn't a parent's rights issue, it's about forcing a "moral code" onto schools that they must now enforce--in a way that doesn't appreciably assist parents or provide benefit to children.   So, a child that transitioned at 5 and now in middle/high school that is by all rights female must now go into a bathroom full of dudes? What about trans men, how will the be treated in the girl's restroom? I see a lot of fantasy predator fearmongering in this kind of comment. All a trans kid wants to do in a bathroom is to handle their bodily functions in peace. Ideally there would be no gendered restrooms or, at least, a valid option for people to choose a non-gendered restroom. However, where is the actual harm happening? A trans girl in a boy's room is going experience more harm than a girl being uncomfortable about a trans girl going into and out of a stall.   How about we teach our children that trans people aren't predators who are trying to game the system to eek out some sexual deviancy via loophole? How about we treat gender in a way that doesn't enforce the idea that girls are prey and boys are  predators? How about we teach them trans kids are just kids who want to get on with their day like everyone else?
    • Adrianna Danielle
      I hope so and glad he loves and accepts me for who I am
    • EasyE
      It is sad that we can't have more open and honest dialogue on these types of topics because there is worthy debate for sure. But instead we have become a country where the only goal is to seize political power and then legislate our particular agenda and views of morality.   Remember as you read my thoughts below, that I am transgender. OK? I am pro-trans. I am trans.   But my middle school aged daughter would be extremely uncomfortable using a school bathroom also used by a biological male, as would nearly all of her friends. That side has to be considered. It's not invalidating to a trans youth's experience to take that into account and hash out what is for the common good of as many people as possible. This is reality - one person's gender expression makes others uncomfortable, in all directions. And there is disagreement on the best way to handle these types of things.   Why can't we talk about these things openly, without the inevitable name-calling that follows, and let all sides have their input and work up suitable solutions? (I bet the kids, if left alone, would work up the best solutions)... Instead, we go straight to trying to pass laws, as if we need more of those!   And why wouldn't we want parents to know if their child has decided to change their pronouns? That's a big deal and parents are right to raise that as a concern. I certainly would want to know. Not that we need to legislate this, but I would have a hard time with school administrators who try to hide this from me. They are out of line. This is my child. Whether you like my viewpoints or not, I am the parent. Not the school.    Again, I am pro-trans. I am trans. At the same point, I recognize that validating a transgender individual's gender identity doesn't trump everything else in society. And sometimes I see that creeping into these discussions. Plus, we fight a losing battle if we have to have others' validation. We are never going to get it from everybody. Ever. Not even Jesus got it and He is God himself!   This country can be very beautiful as we each exercise our freedom to be who we are and let others do the same. But my freedom ends where yours begins and vice-versa. That requires self-sacrifice. Sometimes we have to fall back out of respect for others. Sometimes we have to let the parent be the parent even if we disagree with their politics.   My cry in the wilderness is just can we please have more open, honest dialogue where both sides try take the other's views into consideration and quit automatically going the legislative route to criminalize the other side's viewpoints.   Sorry for the rant but sometimes all of this wears me out... deep sigh... 
    • RaineOnYourParade
      Bite by bite, acrobatics in abdomen
    • Abigail Genevieve
      Yesterday when I put that shirt on I saw a woman looking back out of the mirror at me.  Usually I have looked and been very frustrated because I see a man where there should be a woman.  I was expecting to see a man wearing a woman's shirt, but it was a woman wearing a woman's shirt.   On the spectrum between intersex and trans, I am more thinking I am a lot more intersex than trans, and it is only a matter of time before my wife says "you need a bra" and then "you look like a woman!" She told me whatever I want to do is fine with her, she loves me no matter what, and I am thinking that there may be a lot more for her in this than she could possibly expect. I'm not pushing it with her.
    • Petra Jane
      We have been asked to post this study.   I'm an undergraduate university student in my third year completing a BSc in Anthropology. I'm working on my dissertation, looking at languages with grammatical gender (e.g. languages like Italian and Spanish, nouns are either masculine or feminine). I'm curious if this affects/bothers people with gender identities outside the typical binary of male and female, like non-binary or transgender identities. Using this forum, I would be very grateful if anyone could answer the 5 questions I have put together in a Google form, they are open-ended questions, and you can be as brief or detailed as you want/comfortable with! All responses will also be kept anonymous. As you can probably guess, I came to online forums because finding participants in person is difficult. Talking about gender identities, I understand, can be very personal, so this online anonymised format can be safer. :) If anyone is also particularly interested in this topic, it would be awesome to message one-on-one and do the Google form survey. Having one and one interviews would also be good research! But NONE of this is compulsory, and only if anyone is interested and doesn't mind helping me out and can do so. Institution Supervising Research Study University of Kent Web Address for Study Participation https://docs.google.com/forms/d/e/1FAIpQLSdS9zU_dt3RR1V8-3s_0EnDl6w-jsS6-WOZO41uWeqUP0q_YQ/viewform?usp=sf_link
    • Ashley0616
    • Ashley0616
    • Ashley0616
    • Ashley0616
      @Mia MarieI found this    Here are critical resources to help transgender seniors face the challenges of growing older - LGBTQ Nation   As far as financial aid I came up empty. :( I'm sorry. I can only imagine what you are going through. 
    • Ashley0616
      @Adrianna Daniellecongratulations to you and your boyfriend! Hopefully a future wedding in the future!   @WillowI'm sorry about that he passed away. He sounded like a role model that others should follow.   @MmindyI'm sorry about your head cold! Hopefully it won't last too long and hope for good rest and recovery. 
    • Mmindy
      Good morning Mia,   This is a great question, and I'm looking forward to the input from others.   Mindy🌈🐛🏳️‍⚧️🦋
    • Mia Marie
      I see more and more postings with what the LGBTQ support organizations are doing and I see less and less about helping the older generation of us. All I really see is them wanting to help transgender youths and no matter how many times I ask for help, they tell me they can't help or they tell me the office I contacted only works with the youth only. Is there an organization that helps older transgender people? All I find when I do a search turns out with nothing more than talking about trans youths. I feel as though us older trasn folks are being left out. I applied for financial help in a form of a grant, twice, and was turned down with no explanations of why. They did ask me to help go over applications which told me I was automatically denied. Really doesn't seem fair, does it?  
    • Ivy
      Require students to use bathrooms that align with the gender they were assigned at birth Prohibit transgender girls in seventh grade or older from participating in girls sports or other girls-only activities  Ban gender-affirming health care — including surgery or hormone treatment — for transgender students under age 18, even if parents consent or the treatment is recommended by a doctor Require schools to notify parents if students change their pronouns or otherwise signal they identify as a gender other than what’s on their official student records Doesn't look like it "protects" anybody.  It actually is about restricting trans kids rights.   The ways politicians name their bills etc. is a farce.  Most of the time they do the opposite of what they're called.
  • Upcoming Events

Contact TransPulse

TransPulse can be contacted in the following ways:

Email: Click Here.

To report an error on this page.

Legal

Your use of this site is subject to the following rules and policies, whether you have read them or not.

Terms of Use
Privacy Policy
DMCA Policy
Community Rules

Hosting

Upstream hosting for TransPulse provided by QnEZ.

Sponsorship

Special consideration for TransPulse is kindly provided by The Breast Form Store.
×
×
  • Create New...