Jump to content
  • Welcome to the TransPulse Forums!

    We offer a safe, inclusive community for transgender and gender non-conforming folks, as well as their loved ones, to find support and information.  Join today!

Another Project to Keep Me Busy


Robin.C

Recommended Posts

  • Replies 107
  • Created
  • Last Reply

Top Posters In This Topic

  • Robin.C

    46

  • Jani

    24

  • Charlize

    13

  • Cyndee

    6

Top Posters In This Topic

Posted Images

Hello. Today's installment of The Wonky Duck Bass.

Now I'm not going to show the disaster I had trying to do the internal hollows. I will just show how they look when I got them right ?

During September all the parts I need for the controls arrived from around the world, so ... I can start to build the control plate up. The six-string string guard will be cut down and new holes and slots done to fit all the pots and switches. Cheaper than buying an original or a piece of pearl plate.

Next is how it looks after I jigsawed and routered the pockets for the pickups and set screwed down the saddles.

With those done I could use the saddles as a reference point to make the template for the neck pocket which got routered out and then finished, for a first attempt it fitted perfect. I'm so happy how that turned out considering it could have meant starting all over again.

Last picture of how all these bits look together.

 

This weekend will be finishing of the pockets for the pickups so the wires can reach where they need to go and maybe start building up the controls. Still waiting on a cutter to finish the last internal bits.

 

How you all like it, I know I do ?

 

Hugs

Robyn

014_Oct2021_001_Inner_Hollows.jpg

015_Oct2021_002_Control_Components.jpg

016_Oct2021_003_Pickups_and_Saddles.jpg

017_Oct2021_004_Neck_Pocket_After Routering.jpg

018_Oct2021_005_How_It_Looks.jpg

Link to comment
  • Forum Moderator

I hope you will record a bit of that beauty to share with us.  It's all coming together.

 

Hugs,

 

Charlize

Link to comment

@Charlize oh yes I'll certainly record something that may or may not be considered music. Probably not as I don't know how to play Bass guitar !

 

A couple of weeks ago I got the control panel wired and it makes sound, it will be interesting to see how my version of the stock Hofner setup works.

 

Enjoy.

Hugs

Robin

019_Oct_2021_Sound.jpg

020_Oct_2021_The Mess.jpg

Link to comment
18 hours ago, Jani said:

A clean soldering job!

@Jani, I try though it's getting more difficult to see what I'm doing as I get older.

I'm also finding my eyes are also seeing slightly different as the HRT effects progress. ? 

 

Hugs

Robin

Link to comment
  • Forum Moderator

I remember the ophthalmologist telling me that he got everybody not just the undertaker.  Age certainly makes seeing things more difficult.  Glad you didn't get any solder on the darmstadtium or the meitnerium.  

 

Hugs,

 

Charlize

 

Link to comment

Yes, @Charlize? You're over my head with those words: "darmstadtium or the meitnerium." They remind me to call the eye doctor. Thanks for that. Also, can't wait to hear that bass.

I've got too many projects here at home, myself, so it's good to see the progress of others. The end is in sight!

cheers,

Davie

Link to comment
  • Forum Moderator

@Robin.C Haven't looked lately - but just did - your new bass is looking amazing.

Link to comment
9 hours ago, Charlize said:

Glad you didn't get any solder on the darmstadtium or the meitnerium

Nobody wants to get solder on their darmstadtium  .... ??

@Davie the end might be in sight however it's still a long way off and i'd need a telescope to see it ?

Thank you @Shay hopefully I can learn enough between now and when I finish it to be able to play a few notes on it.

 

I also got my fancy strap for it form the US the other day. Let's just say it will really suit the Bass and it was worth the wait and monies.

 

Also the ball nose cutter I was waiting for has arrived. So this weekend I can try and destroy the front and back of the Bass ?

 

Hugs

Fiona

Link to comment
  • 3 weeks later...

Hello, it seems my initial post disappeared; so this is repost. Not the same words of course since it was a while ago and i forgot what i wrote.

First photo is the body prior to routing the top and rear faces. Second photo is routed bodies. Ball nose cutter did a great job and then i just used a chisel to remove the excess.

Next up the final glue up of the front and rear halves.

Clamp City.

Finally we have the tailpiece and strap which i realised i needed to fit before gluing the bodies together as I'd lose my center-line reference point and you don't want your tailpiece off center ... LOL

 

I need to get the other photos ready. So later this week you will see the coppering and conductive spray pics. As long as it works of course.

 

Hugs

Robin

021_Oct_2021_Internal Body_a.jpg

022_Oct_2021_Internal Body_b.jpg

023_Oct_2021_The gluing.jpg

024_Oct_2021_Strap Mount.jpg

Link to comment
  • Forum Moderator

Soon you will have to post a video of it playing!

 

Hugs,

 

Charlize

Link to comment
  • 2 weeks later...

Hello TP. Bass update. So first up I had knee surgery hence it's been awhile since last lot of photos.

First up is the brass plate to brace the back of the pearloid control panel. Next is the hole I needed to drillfor the tailpiece ground. Then the inner cavities primed (white) and coppered. Next is the carbon conductive paint to give that extra bit of RF shielding and make sure everything is connected in a circuit to ground. And lastly the final glue up.

025_Nov 2021_Brace for controls.jpg

026_Nov 2021_hole for tailpiece ground.jpg

027_Nov 2021_inner cavities.jpg

028_Nov 2021_conductive paint to add another layer of shielding.jpg

029_Noc 2021_final glue up.jpg

Link to comment

Here we go for another lot of pictures.

Yep that's me trying the bass out for size and weight. It is a little heavy. However there is a bit of carving to be done to the front and backs so it may lose a small amount of weight.

Certainly wont be any neck dive ?

Lastly are some pics of the trial fit of everything and a last photo before I pulled it all apart to do the finishing.

Enjoy ..

Hugs

Robyn

030_Noc 2021_test.jpg

031_Nov 2021_systems check.jpg

032_Nov 2021_last shot before final finishing.jpg

Link to comment

Onto the last stuff.

Binding ... omergerd how blumin' difficult. Acrylic glue and lots of blue tape. It worked but sheesh.

Finally I have to admit a stuff up.

When I clamped it together for the final glue up I didn't see that the body pieces had slide a little so i ended up with 1/8" (3mm) gap and ledge on opposite sides. Not good.

The only way I can fix it now is to fill the gaps and re-profile the offending areas hence the last picture.

It means as I can't afford a set of proper binding slot cutters no binding slot on the back so it will just get a 1/2" (12mm) rounded edge.

So there you go all up to date.

It's going to take awhile to make this MDF and filler nice and smooth plus do the carving of the front and back faces. I am hoping to get it to a point where I can start painting it during my Christmas holidays.

Wish me luck.

 

And big HUGS to everyone.

Robyn

033_Nov 2021_gluing binding on.jpg

034_Nov 2021_Binding closeup.jpg

035_Nov 2021_where we at filling.jpg

Link to comment
  • Forum Moderator

You have certainly been working hard and it shows.  I particularly love seeing the bear playing base on the couch.  Enjoy! its going great.  New year concert?

 

Hugs,

 

Charlize

Link to comment
  • Forum Moderator

I love the shape you've given this Bass, voluptuous!  I've been thinking this was going to be heavy as its made with MDF.  Could you have made the routs larger without compromising the rigidity of the sides and faces?   What is the unfinished weight?  

 

Jani 

Link to comment
3 hours ago, Jani said:

What is the unfinished weight?

About 4.5lbs at the stage ?

I knew it would be heavy. Probably a bit portly for lugging around to gigs. If I was a musician, and I'm not ?

 

Sadly I was having troubles with the sides flexing at this thickness when I was routing the edges. I've learnt a lot with this build. I had no idea how to build a guitar when I started.

Does it show ? ?

 

I've already got ideas for a Fender Bass project that I want to use the parts I bought for this one that I couldn't use this time around. 

 

Methinks I might end up making a few basses over the next couple of years. They take up a lot less space than my car projects ?

 

Happy Saturday everyone ?

 

Hugs

Robyn

Link to comment
  • Forum Moderator

Wow, at 4.5 pounds that is quite light for a bass. My short scale Hofner Viola Bass (think Beatle Bass) is 5lbs.  My Yamaha is 8.5lbs. which is typical for most Basses.  A good strap is a must. 

 

I agree about taking up less space!   I was up to 12 at one time and except for the daily drivers they were all kept inside.  I'm down to three cars and a truck now.  I keep my guitars and basses in one room now!  

That seems like a good project.  I've got all the woodworking tools but I'm not sure I have the desire at this point.    

 

Cheers, 

Jani

Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Who's Online   7 Members, 0 Anonymous, 146 Guests (See full list)

    • Jet McCartney
    • Abigail Genevieve
    • Sienna14
    • Carolyn Marie
    • Ashley0616
    • EasyE
    • DeeDee
  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    • Total Topics
      80.7k
    • Total Posts
      768.3k
  • Member Statistics

    • Total Members
      12,024
    • Most Online
      8,356

    JamesyGreen
    Newest Member
    JamesyGreen
    Joined
  • Today's Birthdays

    1. Dillon
      Dillon
    2. Kaylee888
      Kaylee888
    3. lily100
      lily100
      (39 years old)
    4. Luce
      Luce
      (44 years old)
    5. Luke.S
      Luke.S
  • Posts

    • Abigail Genevieve
      Them's fighting words, but I intend to discuss this respectfully, calmly and so forth, in accordance with the forum rules.   Considering the one issue below in isolation:   There is a political calculus that trans folk may be better off under Trump than under Biden.  The argument goes that Biden has created such a backlash by moving so far to the left that red states, in particular, are reacting with a swarm of laws that negatively impact trans folk.  Some of his actions strike many people as clumsily forcing unwanted regulation on people, and some of his appointments, such as the luggage stealing bigender individual, have not helped advance trans folk but rather the reverse.  In a second term Biden would make things worse for trans folk because of the backlash and resentment his policies would create.    Trump likely would have negative impacts to trans folk, as he did in his first term with respect to the military, so it is a set of tradeoffs as to which is worse.   Thoughts?
    • Abigail Genevieve
      Can you dress androgynously? 
    • Ashley0616
    • Abigail Genevieve
      There are trans folk who pass better than some cis people.  People usually aren't on the lookout for those who are cross dressed.  As long as there are no multiple screaming signals and you don't draw attention to yourself you can probably pass better than you think. For example, if you walk into a bank in heels, however, and you DON'T know how to walk in heels, you will attract the attention of a security guard, especially if you are acting nervous. If you wear flats and just go to the bank and do your business like anyone else, it is likely no one will notice, except that there was a customer who was taller than most women are, but then there are tall women, and tall, broad shouldered woman.  I made the mistake years ago of thinking I had outed such, and knew she was a he.  Later I learned she had five kids, and her husband was bigger than she was.  Ooops.
    • Abigail Genevieve
      I don't know much about CNAs.  They report to an RN, right?  Can you somehow bring this up to the RN in a way that does not get your CNA mad at you? I'm not saying you should, but maybe that is a good course of action.
    • Abigail Genevieve
      This is the thing.  A month ago tomorrow is when I stopped wearing m clothing.  Today I feel great.  I do not have dysphoria when I am dressed as and I move as a woman.  I was just thinking about that because I was wondering if I would or will get hit with a wave of "you don't have dysphoria so you might as well dress like a guy. Less hassle with your wife."  Not that she is aware, to my knowledge, that these androgynous clothes are women's.  No desire to "flip", no feeling of need to, just happy identifying as female.  Speaking, in my deep guy voice, with female voice patterns, doing the feminine gestures that come naturally and without exaggeration and at peace.
    • Birdie
      Yes, my brother was born lactating due to absorbing hormones from my mum.    Of course she isn't a nurse, she is a CNA. She should however still have general medical knowledge.
    • Abigail Genevieve
      I agree.  But sometimes unethical conduct must still be legal, because the cure would be worse than the disease.  One problem we have today with the internet is the trolls can gang up on someone and destroy them - we see the with school bullying as well.   He was in the Southern Baptist Convention, and maybe he should have moved his church over to say the American Baptists, who might have been able to help him. A Southern Baptist pastor is king in his church, peerless, which means he could not have gone for help in his church.  And he could not have gone for help from any other pastor in the SBC because they likely affirm the SBC statements on these matters.  I think he was stuck.    I read this when it came out in the news.  Very sad situation.  
    • Carolyn Marie
      One organization that I know of that is dedicated to assisting LGBT seniors is SAGE.  They advocate for, and have services for, all LGBT folks, not just trans folk.  You can find their website Here.  I am not sure what, if anything, they have in terms of financial assistance.  I'll let you know if I find anything else.   Carolyn Marie
    • Davie
    • VickySGV
      This was an angle that I was very suspicious of as well, and may be the hook on which the settlement was hung.      Not at all strange especially if they had former patients who moved there that still owed money on their bills or they were buying hospital supplies from a Texas corporation. They may have business licenses in other states as well.  Small loss, but saxeT shot itself in the foot there since the license was a source of income to the state. 
    • RaineOnYourParade
      Nah it's fine, I'm past the point of really blaming them most of the time. I've gotten used to it, and they could be a whole lot worse.   I'm glad you have a good place, though <3
    • Abigail Genevieve
      I wonder about the professional knowledge level here.  Men have milk ducts.  She, as a nurse, should know this.  This is interesting  https://www.livescience.com/45732-can-men-lactate.html  Yes, men can lactate and have lactated, trans or cis.  The idea that Birdie does not have milk ducts or tissue is just plain wrong.  Her statement indicates that she has not looked at the medical record, which she should be familiar with to treat the patient. 
    • Ivy
      Trans women can lactate under the right conditions. But that's not even the case in your situation.  It's so stupid how they simply refuse to accept your reality.
    • missyjo
      I used to include going ti worship but no longer    awkward good fir you. enjoy. :)   raine  sorry. my family is pretty lousy at support too. my part time job helps alot. hope it gets better fir you n all
  • Upcoming Events

Contact TransPulse

TransPulse can be contacted in the following ways:

Email: Click Here.

To report an error on this page.

Legal

Your use of this site is subject to the following rules and policies, whether you have read them or not.

Terms of Use
Privacy Policy
DMCA Policy
Community Rules

Hosting

Upstream hosting for TransPulse provided by QnEZ.

Sponsorship

Special consideration for TransPulse is kindly provided by The Breast Form Store.
×
×
  • Create New...