Jump to content
  • Welcome to the TransPulse Forums!

    We offer a safe, inclusive community for transgender and gender non-conforming folks, as well as their loved ones, to find support and information.  Join today!

Another Project to Keep Me Busy


Robin.C

Recommended Posts

  • Replies 107
  • Created
  • Last Reply

Top Posters In This Topic

  • Robin.C

    46

  • Jani

    24

  • Charlize

    13

  • Cyndee

    6

Top Posters In This Topic

Posted Images

Hello. Today's installment of The Wonky Duck Bass.

Now I'm not going to show the disaster I had trying to do the internal hollows. I will just show how they look when I got them right ?

During September all the parts I need for the controls arrived from around the world, so ... I can start to build the control plate up. The six-string string guard will be cut down and new holes and slots done to fit all the pots and switches. Cheaper than buying an original or a piece of pearl plate.

Next is how it looks after I jigsawed and routered the pockets for the pickups and set screwed down the saddles.

With those done I could use the saddles as a reference point to make the template for the neck pocket which got routered out and then finished, for a first attempt it fitted perfect. I'm so happy how that turned out considering it could have meant starting all over again.

Last picture of how all these bits look together.

 

This weekend will be finishing of the pockets for the pickups so the wires can reach where they need to go and maybe start building up the controls. Still waiting on a cutter to finish the last internal bits.

 

How you all like it, I know I do ?

 

Hugs

Robyn

014_Oct2021_001_Inner_Hollows.jpg

015_Oct2021_002_Control_Components.jpg

016_Oct2021_003_Pickups_and_Saddles.jpg

017_Oct2021_004_Neck_Pocket_After Routering.jpg

018_Oct2021_005_How_It_Looks.jpg

Link to comment
  • Forum Moderator

I hope you will record a bit of that beauty to share with us.  It's all coming together.

 

Hugs,

 

Charlize

Link to comment

@Charlize oh yes I'll certainly record something that may or may not be considered music. Probably not as I don't know how to play Bass guitar !

 

A couple of weeks ago I got the control panel wired and it makes sound, it will be interesting to see how my version of the stock Hofner setup works.

 

Enjoy.

Hugs

Robin

019_Oct_2021_Sound.jpg

020_Oct_2021_The Mess.jpg

Link to comment
18 hours ago, Jani said:

A clean soldering job!

@Jani, I try though it's getting more difficult to see what I'm doing as I get older.

I'm also finding my eyes are also seeing slightly different as the HRT effects progress. ? 

 

Hugs

Robin

Link to comment
  • Forum Moderator

I remember the ophthalmologist telling me that he got everybody not just the undertaker.  Age certainly makes seeing things more difficult.  Glad you didn't get any solder on the darmstadtium or the meitnerium.  

 

Hugs,

 

Charlize

 

Link to comment

Yes, @Charlize? You're over my head with those words: "darmstadtium or the meitnerium." They remind me to call the eye doctor. Thanks for that. Also, can't wait to hear that bass.

I've got too many projects here at home, myself, so it's good to see the progress of others. The end is in sight!

cheers,

Davie

Link to comment
  • Forum Moderator

@Robin.C Haven't looked lately - but just did - your new bass is looking amazing.

Link to comment
9 hours ago, Charlize said:

Glad you didn't get any solder on the darmstadtium or the meitnerium

Nobody wants to get solder on their darmstadtium  .... ??

@Davie the end might be in sight however it's still a long way off and i'd need a telescope to see it ?

Thank you @Shay hopefully I can learn enough between now and when I finish it to be able to play a few notes on it.

 

I also got my fancy strap for it form the US the other day. Let's just say it will really suit the Bass and it was worth the wait and monies.

 

Also the ball nose cutter I was waiting for has arrived. So this weekend I can try and destroy the front and back of the Bass ?

 

Hugs

Fiona

Link to comment
  • 3 weeks later...

Hello, it seems my initial post disappeared; so this is repost. Not the same words of course since it was a while ago and i forgot what i wrote.

First photo is the body prior to routing the top and rear faces. Second photo is routed bodies. Ball nose cutter did a great job and then i just used a chisel to remove the excess.

Next up the final glue up of the front and rear halves.

Clamp City.

Finally we have the tailpiece and strap which i realised i needed to fit before gluing the bodies together as I'd lose my center-line reference point and you don't want your tailpiece off center ... LOL

 

I need to get the other photos ready. So later this week you will see the coppering and conductive spray pics. As long as it works of course.

 

Hugs

Robin

021_Oct_2021_Internal Body_a.jpg

022_Oct_2021_Internal Body_b.jpg

023_Oct_2021_The gluing.jpg

024_Oct_2021_Strap Mount.jpg

Link to comment
  • Forum Moderator

Soon you will have to post a video of it playing!

 

Hugs,

 

Charlize

Link to comment
  • 2 weeks later...

Hello TP. Bass update. So first up I had knee surgery hence it's been awhile since last lot of photos.

First up is the brass plate to brace the back of the pearloid control panel. Next is the hole I needed to drillfor the tailpiece ground. Then the inner cavities primed (white) and coppered. Next is the carbon conductive paint to give that extra bit of RF shielding and make sure everything is connected in a circuit to ground. And lastly the final glue up.

025_Nov 2021_Brace for controls.jpg

026_Nov 2021_hole for tailpiece ground.jpg

027_Nov 2021_inner cavities.jpg

028_Nov 2021_conductive paint to add another layer of shielding.jpg

029_Noc 2021_final glue up.jpg

Link to comment

Here we go for another lot of pictures.

Yep that's me trying the bass out for size and weight. It is a little heavy. However there is a bit of carving to be done to the front and backs so it may lose a small amount of weight.

Certainly wont be any neck dive ?

Lastly are some pics of the trial fit of everything and a last photo before I pulled it all apart to do the finishing.

Enjoy ..

Hugs

Robyn

030_Noc 2021_test.jpg

031_Nov 2021_systems check.jpg

032_Nov 2021_last shot before final finishing.jpg

Link to comment

Onto the last stuff.

Binding ... omergerd how blumin' difficult. Acrylic glue and lots of blue tape. It worked but sheesh.

Finally I have to admit a stuff up.

When I clamped it together for the final glue up I didn't see that the body pieces had slide a little so i ended up with 1/8" (3mm) gap and ledge on opposite sides. Not good.

The only way I can fix it now is to fill the gaps and re-profile the offending areas hence the last picture.

It means as I can't afford a set of proper binding slot cutters no binding slot on the back so it will just get a 1/2" (12mm) rounded edge.

So there you go all up to date.

It's going to take awhile to make this MDF and filler nice and smooth plus do the carving of the front and back faces. I am hoping to get it to a point where I can start painting it during my Christmas holidays.

Wish me luck.

 

And big HUGS to everyone.

Robyn

033_Nov 2021_gluing binding on.jpg

034_Nov 2021_Binding closeup.jpg

035_Nov 2021_where we at filling.jpg

Link to comment
  • Forum Moderator

You have certainly been working hard and it shows.  I particularly love seeing the bear playing base on the couch.  Enjoy! its going great.  New year concert?

 

Hugs,

 

Charlize

Link to comment
  • Forum Moderator

I love the shape you've given this Bass, voluptuous!  I've been thinking this was going to be heavy as its made with MDF.  Could you have made the routs larger without compromising the rigidity of the sides and faces?   What is the unfinished weight?  

 

Jani 

Link to comment
3 hours ago, Jani said:

What is the unfinished weight?

About 4.5lbs at the stage ?

I knew it would be heavy. Probably a bit portly for lugging around to gigs. If I was a musician, and I'm not ?

 

Sadly I was having troubles with the sides flexing at this thickness when I was routing the edges. I've learnt a lot with this build. I had no idea how to build a guitar when I started.

Does it show ? ?

 

I've already got ideas for a Fender Bass project that I want to use the parts I bought for this one that I couldn't use this time around. 

 

Methinks I might end up making a few basses over the next couple of years. They take up a lot less space than my car projects ?

 

Happy Saturday everyone ?

 

Hugs

Robyn

Link to comment
  • Forum Moderator

Wow, at 4.5 pounds that is quite light for a bass. My short scale Hofner Viola Bass (think Beatle Bass) is 5lbs.  My Yamaha is 8.5lbs. which is typical for most Basses.  A good strap is a must. 

 

I agree about taking up less space!   I was up to 12 at one time and except for the daily drivers they were all kept inside.  I'm down to three cars and a truck now.  I keep my guitars and basses in one room now!  

That seems like a good project.  I've got all the woodworking tools but I'm not sure I have the desire at this point.    

 

Cheers, 

Jani

Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Who's Online   4 Members, 0 Anonymous, 140 Guests (See full list)

    • Abigail Genevieve
    • Adrianna Danielle
    • MaryEllen
    • Betty K
  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    • Total Topics
      80.6k
    • Total Posts
      768k
  • Member Statistics

    • Total Members
      12,014
    • Most Online
      8,356

    Quillian
    Newest Member
    Quillian
    Joined
  • Today's Birthdays

    1. l.demiurge
      l.demiurge
  • Posts

    • Abigail Genevieve
      By which I mean there is a cultural stereotype of what a man is, and one of what a woman is.  Even worse, of what a transgender person is.   You be you.   I read of a boy who thought he was a girl because he did not adhere to some (rather toxic) conceptions of what it means to be a man, so he decided he was a girl.  He was told he didn't have to conform to stereotype and got happy. "You mean I don't have to transition?" He didn't want to, and was relieved.   Once upon a time if you were transgender they told you either you transition or die.   Incorporate the best of what it means to be a man and the best of what it means to be a woman as much as you possibly can, and let the rest go.  Be fully human. Be alive. Don't conform to some cultural crud.
    • Abigail Genevieve
      On the way back to her desk she was interrupted by six short, urgent conversations that had to be attended to. Then she slipped into the women's room and locked the stall door.  She took a deep breath, then another, and allowed herself to shake for five minutes,  Then deep breathing, ten in and ten out, stretch up, touch the floor, neck rolls and she was fine. She used the toilet and a woman knocked and said, "Taylor, are you okay?"   "Ready to conquer the world!"  on her way out she found her makeup was fine.  Three stalls, two sinks.  If she ever designed a women's room with three stalls, there would be four sinks, with plenty of space to plunk your stuff down between them.   She met a deferential Karen.  "Here is the branding I came up with," she said.  And she went back to working as hard as Brenda and Mary, who looked up worriedly and then went back to the proposal.   Shortly before 5:00 she received an email with the title Consolidation and Compensation.  In it she learned that the position of office manager was eliminated, and the current office manager was to become the chief executive officer. The former CEO, along with the CFO, the chief legal officer, and sundry staff, had been terminated, per the Board of Directors.  Effective immediately everyone would receive a base salary of $20,000 with a commission to be set by the individual's supervisor.  Each supervisor would be given a certain percentage to distribute.  Most functions they had been handled would be outsourced as needed.   "The question of what profit was made last year is frequent enough to be answered.  The company lost over 500,000 in fiscal 2023.  At this point further cuts are not anticipated.  We will be strategically adding positions that will enhance our profits. Hard work is expected of everyone."   Her two web guys had been complaining because their games had been remotely uninstalled.  After the memo came out they were absolutely silent.  That gave her an idea, and after an exchange of emails they were reassigned to maintenance out at the plant, effective tomorrow morning.  There were lots of weeds that needed pulling, if nothing else. That email went out after they left early, for the day.  The maintenance foreman was a no-nonsense type who did not tolerate slacking, and they would learn a thing or two.  This also freed up two spaces for her to put new people.
    • Davie
      Except for this thung thwister: Theophilus Thistle, the successful thistle sifter, in sifting a sieve full of unsifted thistles, thrust three-thousand thistles through the thick of his thumb. Now if, Theophilus Thistle, the successful thistle sifter, in sifting a sieve full of of unsifted thistles, thrust three-thousand thistles through the thick of his thumb, how many thistles can'st thou thrust through the thick of thy thumb . . . in sifting a sieve-full of unsifted thistles? Success to the successful thistle sifter!
    • VickySGV
      You have given you and us a big clue right there.  I hope you have shared this observation with your Endocrinologist and are willing to take their advice about changing that behavior.    Non prescribed herbal or animal supplements can have a negative effect on your body's use of your available hormones.  Also, your genetics are going to be controlling what your body is going to do with your hormones, and again, that is for you to consult with your Endocrinologists.  On this site none of us are licensed medical personnel and we cannot give you advice on your health more than what your doctor can.  We have rules that we enforce against our members advising about "Folk Remedies" because we have had members who have gone that route and badly damaged their health and quality of life.  Only thing I can go anywhere on, is that maybe if you change your expectations of what should happen, you will at least not be in danger of harming yourself from anxiety.
    • Timi
      Hi @violet r!    Thank you so much for sharing. I'm so glad you found this place. I hope you find as much comfort and support here as I have.    -Timi    
    • marysssia
      Hi lovely people,   I'm a 25 yo MtF woman, and I've been suffering from low estrogen issues since October 2023. I completely lost my feminine libido, my breast completely stopped growing, my estrogen levels dropped by a lot (despite NOT decreasing my E dosage) and thus my dysphoria drastically increased. I think it is worth mentioning that, for my health issues, I had been taking ----- Lamotrigine for months & had been on ketogenic diet, and these things seem to be a culprit of my current issue. I weaned off Lamotrigine some time ago and gave up on keto diet, but it still doesn't seem to help. My estrogen is still low (44 ng/ml) and my libido hasn't come back yet. In general, I struggle with my dysphoria so much because of that and, to be honest, I don't know what to do. I've tried so many dietary supplements, yet I didn't get any effects from them. My endocrinologist didn't know how to help me. She only suggested to increase my daily estrogen dose (to 3x per day ------sublingual estrogen tablets and 3x per day ------ estrogen gel applied to armpits or thighs), which I did, without any effect.   Please, help me. Prior to keto diet & Lamotrigine treatment, I'd never had experience like that. I'm basically helpless and have no clue what to do. Having to deal with low estrogen is a horrible experience to me and it affects my life severely.   BTW, my T levels are always within female range.   Do you have any clue what exactly I should do?
    • April Marie
      I love wearing a jeans skirt!! That looks like airport carpet. Safe travels if you're flying!!
    • Maddee
      Flight faraway forthcoming Fabulous forum friends 😊😊🎸🦂
    • Maddee
    • KathyLauren
      One of our cats is polydactyl.  He has 7 toes on each front paw and 5 on each back paw, for 24 toes total.   Another one, an ex-feral who, at the time, was free to roam, climbed 50 feet up a tree without having any thought about how he was going to get down.  His pal climed down backwards, but he couldn't.  He ended up coming down by leaping from branch to branch.  Which nearly gave us heart attacks, because he only has one eye and therefore has no depth perception.   The other ex-feral (both are now indoor cats) obviously does not have those soft pads on his feet.  At night, when we are in bed, we can hear him stomping around the house.
    • Abigail Genevieve
      The two o'clock Onshoring meeting was going well.  Taylor was leading, inviting other people up to speak on their specialties. Aerial photogrammetry and surveying, including the exact boundary, were out for contract signature  Gibson had handled that - Manufacturing was supposed to, but somehow hadn't happened.  Legal issues from Legal. Accounting reported on current costs, including all upkeep, guard salaries, etc.  Manufacturing was supposed to give those numbers, but they hadn't.   The downside was the VP of Manufacturing.  He had arrived at the meeting red-faced, his tie askew, clutching a bottle. It smelled strongly of vodka. He had never done anything in his twenty years of being VP of Manufacturing, and he did not like being asked now.   "Mr. ----, do you have the inventory we asked for?" Taylor asked politely.  VP Gibson had asked him to have his people go through the plant and not only inventory but assess the operational status of every piece of equipment.  They needed to know what they had. "I'm not going to take any f---- orders from a g-d- tra---," he snarled. "God knows what kind of perverts it has dragged into our fair city and bangs every night." "That is completely out of line." That was Gibson.  Taylor controlled herself.  That was a shot at Bob, not just at Taylor.  She was glad Bob was not there to do something stupid.  Had Mrs. McCarthy been talking? What had she said?  Was she given to embellishment?  Taylor took a deep breath. "I'm not sorry.  You f--- can take this stupid onshoring --- and shove it up your -" "That is quite enough."  This was the head of HR. "You can take your sissy ways and sashay -" "You are fired." "You can't fire me." "Oh, yes I can," said the office manager.  The VP took another swig from his bottle. "Try it."  He looked uncertain. "I will have you removed.  Are you going to leave on your own?  I am calling the police to help you leave." And he dialed the number. He stomped out cursing. They heard him noisily go down the hall.  This was the front conference room.  He actually went through security and out the door, throwing his badge on the ground on his way.  The guard picked it up. They could see this through the glass wall. "Can you fire a VP?" "The Board told me that if anyone gives me problems they should be shown the door. Even a VP.  I can fire everyone here. I won't, of course. Those were problems." "Are you alright, Taylor?" She nodded.  "I've heard worse.  Shall we continue?" And they did.   The last item was that certain business people in China had been arrested, and the corporation that had been supporting them all these years had been dissolved.  They were on their own, and the Board was dead serious on straightening things out.  After this meeting, Taylor believed it.  She did not attend the meeting to discuss how to distribute the few duties the VP of Manufacturing had done.  That was ultimately up to the Board.    
    • Abigail Genevieve
      Lunch was at Cabaret, still free.  The place was quiet: it was the sort of place you took a business client to impress them, and the few other people were in business suits.  Most of the legal profession was there.   She told him of the morning's frustrations, breaking her own rule about confidentiality.  She asked Karen how the branding was going, and Karen had snapped back that she had not started on it yet - they had all these proposals.  Taylor had explained that it was important, for the two o'clock meeting, and Karen told her to do it herself.  Karen pointed out that Taylor could not touch her - her uncle was on the Board and her brother was VP of Manufacturing.  Nor would the two computer guys go out to the plant - they were playing some kind of MMORPG and simply not available. If she wanted the pictures, she should go.  Mary prayed an Ave Maria, but both she and Brenda were racing to get the proposal out. The client wanted it Friday for review.   She didn't bring up what Mrs. McCarthy had told her.  She wasn't sure how to approach it.  She thought of telling her of a 'something more comfortable' she had bought in case he ever DID show up at her door. It was in the bottom drawer of her dresser, ready to go.  Instead she talked about moving to a place with a garage.  Several of the abandoned houses had one, and they had been maintained well with China cash.   Bob had finally realized that when he was introduced as Bob, Taylor's boyfriend, that was just how things were done here. Other people had introduced each other in terms of family relationships, which were strong.  Long before you found out anything else about someone, you knew how they were related.  Family kept people from leaving Millville.    "What is the real name of this town, anyway?"   She laughed.  "I am trying to find that out.  It's 'Welcome to Millvale' when you come into town from the north, and 'Welcome to Millville' on the south.  I have counted two other variants."   "What a town. Roosevelt is like that, with the families, but there is only one spelling."  
    • Ashley0616
      Nothing wrong with that. I'm glad that you found what makes you happy! Just curious what does your wife think? If it's too personal I understand.
    • Ashley0616
    • Ashley0616
      – According to a recent survey, the most popular name for a dog is Max. Other popular names include Molly, Sam, Zach, and Maggie.
  • Upcoming Events

Contact TransPulse

TransPulse can be contacted in the following ways:

Email: Click Here.

To report an error on this page.

Legal

Your use of this site is subject to the following rules and policies, whether you have read them or not.

Terms of Use
Privacy Policy
DMCA Policy
Community Rules

Hosting

Upstream hosting for TransPulse provided by QnEZ.

Sponsorship

Special consideration for TransPulse is kindly provided by The Breast Form Store.
×
×
  • Create New...