Jump to content
  • Welcome to the TransPulse Forums!

    We offer a safe, inclusive community for transgender and gender non-conforming folks, as well as their loved ones, to find support and information.  Join today!

The Dead


Guest Alexander

Recommended Posts

Guest Alexander

The dead are watching,

faces pressed against the glass

outside my bathroom window.

I catch glimpses of their faceless faces,

but only when I'm bleeding emotion into

the swirling water of a bath tub drain.

During the end of the world

they rise up to block out the light,

the shining light of the moon

which was my solemn comfort,

once.

When purple silk lies weeping

on my pillow in the night,

they are here with me,

their voices ever so quiet,

like the whispers of whispers.

Out of the corner of my eye,

I see pale skin dart away,

peeking around the trees.

But I never see their features,

nose less,

eyeless,

mouth less,

but screaming, screaming, screaming

in my mind, in the dark places

that I try to deny

existence.

In the memory of sounds

that never were,

I clutch my head and kneel on the floor,

carpet rough on my knees,

the dead rough on my thoughts.

When walking in the night the dead

do not touch me, they stay

hidden

and

illusory,

Never really there.

But there, because I see them,

I see them, I see them.

Madding reminiscences that were never real.

Are they real?

But I see the dead outside my bathroom window

in the night, in the cool darkness

madness.

Link to comment
Guest Elizabeth K

DARK

I like it - but I read Lovecraft too - and Clive Barker - and collected the Sandman series - and I DO see the dead - in dreams... but they seem more allies than demons - except the one in the reoccuring nightmare that splits open my head with an axe - I don't like that vision... but the others, my people mainly - you see I am the next to die in my family, everyone else older than me is gone. But I figure I got another 20 years outside.

I am also in transition and I ask the dead about that because they never knew me as I really am - they died too early - and I stole the names of four (Elizabeth) and two (Anne).

They laugh and tell me I was a fool - I shoulda transitioned YEARS ago - and they gave me absolution on the names - they are actually proud- the dead always like to be remembered.

Sorta got a bit dark myself - but death comes knocking sooner than later when you are older. Its really not a scarey as it seems. I mean - we are alive right now. A hundred years from now - EVERYONE on earth now, will be dead.

SKULLS AND CROSSBONES - AHRRRRRRR

Lizzy

Link to comment

Very well written, Dark but dark can be good when it is this well written.

I of course grew up on Poe and truely believe that I am viewing the House of Usher when I go to my parent's house, the home of my childhood as it slips into ill repair with my father too old to do repais himself and living on a fixed income as well. I am the youngest and my sister has no children. I am afraid that if I go inside the house will sink into the Earth and we will be no more.

OK, I don't stay there too long because with two people past 85 it's hot in there!

Love the macbre,

Sally

Link to comment
Guest Alexander

Thank you both. I try my best to write non-cliched dark poems, and I take a lot of inspiration from Poe, Anne Sexton, and Sylvia Plath. Except without the bad end they all came to, of course...

Link to comment
Guest Naomi Stardust

grew up with poe

spent my teens with clive barker

like the poem

i like macbre

even when i'm not in a dark mood

i didn't catch any cliches either

good poem

Link to comment
Guest Felicia Anne

alexander, that was excellent. dark, but i really loved it. you have a style that really calls to me, and i would love to see you write more in these forums.

(i must sound like a blithering groupie...)

Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Who's Online   8 Members, 0 Anonymous, 65 Guests (See full list)

    • Mmindy
    • Ashley0616
    • Ivy
    • Jet McCartney
    • rachel w
    • missyjo
    • Lydia_R
    • Abigail Genevieve
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    • Total Topics
      80.7k
    • Total Posts
      768.8k
  • Member Statistics

    • Total Members
      12,038
    • Most Online
      8,356

    Justine76
    Newest Member
    Justine76
    Joined
  • Today's Birthdays

    1. April Marie
      April Marie
    2. daniela...
      daniela...
      (59 years old)
    3. Emily May
      Emily May
    4. Felixr
      Felixr
      (20 years old)
    5. Leann
      Leann
      (56 years old)
  • Posts

    • Ivy
      The right tool makes things easier for sure.
    • Ashley0616
      calmness:  : a period or condition of freedom from storms, high winds, or rough activity of water : complete absence of wind or presence of wind having a speed no greater than one mile (1.6 kilometers) per hour see Beaufort Scale Table : a state of tranquility
    • Ashley0616
    • Ashley0616
    • Ashley0616
    • Lydia_R
      And I love your new profile pic @Ivy!  Wow, looking great!
    • Jani
      I hadn't heard about the John Sebastian invite.  Interesting.  He certainly would have blended in well with the other three. 
    • Lydia_R
      Thanks for responding @Vidanjali!  You rock!   Yes, I'm really good at trig and most of what you were writing about is old hat to me.  I studied trig while I was living on the streets in 2004.  After about two weeks of studying the Plane Trigonometry book that I had checked out from the Seattle library, I woke up at 3am on the sidewalk and realized that .5 is the sine of 30 degrees and .523 is the circumference measure in radians up to 30 degrees.  After that, it all opened up for me and a few weeks later I coded an animated webpage slinky.  I started getting into coding perspective properly.  And then after a month or two of that, I went back to applying my new trigonometry skills to the collision detection I was coding previously only with ratios to make a video game I was calling Micropede, a Centipede type of clone.   And then a few months after that I coded an Asteroids type clone with shields in about 4 hours that I called Bumper Bubbles.  And with a bunch of effort of getting off of the streets and more studying, I went on to have a computer programming career for the last 20 years.  I always get a kick out of getting paid to do trigonometry, but I'm certainly not doing it every day.   This line of thought recently has come around to the old question of how to code the trigonometric function.  What is the code inside of the multiplication, division and trig functions in a calculator?  It seems that multiplication has the 10x10 multiplication table coded in as constants and then it loops to do numbers larger than 100 (for base 10).  Division is just like how you would solve a division problem.  It involves guessing.  So a computer function to do division would have to go through loops while it guesses and uses multiplication.   Then comes the trigonometric function.  I've been thinking a lot lately that pi is calculated by producing a large physical wheel and rolling it out on a flat surface and measuring it.  When I was on the streets, I would take a Starbucks stir stick and put a hole in either end of it.  I'd put a push pin in one end and then my pen in the other end.  That is one way to draw a perfect circle and it doesn't matter whether the stir stick is straight because the line between two points is always a perfect line.  The other way to do it is with a string instead of the stir stick.   When I was on the streets, it made me wonder how humans made perfectly straight, flat objects.  My theory is that it evolved over time.  Once you can create a perfect circle or saw blade, then you can use that to make a flat surface.  But the trick is a crap in crap out deal.  You have to start with a really perfect circle.   But you have introduced a new concept here with the square root deal.  Andy has been mentioning square roots with a song called the square root of two that he listens to.  And that brings up irrational numbers and personally, with where I am at in math, I don't place a huge significance on "irrational" yet.  I mean, would the same number have the same infinitely repeating pattern if it were expressed in a different base?  Maybe it does.  I don't tend to find the concept of that all too interesting.  But how you mention sqrt(3)/2 is interesting and is something I haven't considered yet.   You know, I could have been doing drugs on the streets, but I figured that I'd have a better chance at making a good life for myself if I studied this stuff and well, I was 33yo when I wound up on the streets and it's not like I felt I was missing out on some big drug experience that I hadn't experienced before.  I got to the point where math and programming were more fun that drugs, so like that, I guess math became my drug of choice.  Or work.  Math is an inexpensive hobby.   Hugs, Lydia_n  
    • Abigail Genevieve
      Right now I am more concerned about tornadoes than anything else, but then I am not all that concerned about tornadoes.   If there is a watch or a warning I will take appropriate action.   I take the precautions any woman takes when out in public in general. 
    • Willow
      @KymmieL yes you’d better avoid the Snap on Truck EXCEPT. (Oh oh) when you need a special tool.  They are very good at having all the Dealerships only tools.  They somehow get ahold of one (or made it in the first place) those things that keep dealers in that special place of being the only place certain things can be fixed.     I once had a FiAT X1/9. Mid engine sports car.  To adjust the timing, a relatively simple thing to do back in the 70s, you had two choices, cut a hole in the firewall to put a wrench through or buy or make a special wrench.  Parts department at the dealer swore there was no such special wrench.  After much research I found the part number.  (Internet did not exist yet). It was before IBM made the first PC. The parts manager finally agreed to get me the part but only if I paid up front and it was mine, regardless of what came in.  It was exactly what I needed a 14mm wrench with a specially shaped handle. That went around the distributor cap and turned backwards.  Looked somewhat like the letter C with an open wrench head at the bottom.     Fix It Again Tony  
    • Ashley0616
      It depends on the circumstances. 
    • atlantis63
      if I can eat it, sausages wrapped in bacon   I say if I can eat it, I've been eating chocolate this afternoon.. lots of chocolate
    • Vidanjali
      After I put on a binder I lie on my back on my bed and let gravity do its thing while I adjust the binder. This helps to make the chest flat and uniform. However its not perfect. If you have any sizeable chest, which I definitely do, there's going to be some bulge and I think that's unavoidable. But I have found letting the boobs drop off to the sides to be better than the mass of them being front and center. You will get some bulk along the sides, but I think that's easier to obscure with clothing and posture.   Of course it helps to have a properly sized binder. The one you were given, is it too small or too big? If it's too big and if you have some sewing skills, you can try altering it.
    • Willow
      Good morning    it’s back to work today. Noon.  Turned down another car.  Yes it was everything they said it was but not exactly what I wanted.   @awkward-yet-sweet you are right, when tools were made in the US like the Black and Decker/DeWalt line made in Baltimore or Rockwell Delta Milwaukee and so many others.  But now they are all made in the same factories overseas using the same parts.  It is really difficult to get good tools anymore.  I am slowly switching any power tools to battery operated, but that also means you have to stick to one brand so that you don’t have lots of incompatible batteries and chargers.  In some cases like DeWalt verses Black and Decker.  I started with DeWalt so there I am.  And now they are moving from 20v to 40v.  Anything to keep you buying new.     As for craftsman they always had a warrantied for for life and a line that wasn’t, they just didn’t tell customers that until you tried to get it replaced.  My wrenches are all from before Sears went out and had a lifetime warranty but that is worthless now because it would be replaced the junk.   Willow
    • Vidanjali
      Oops don't know how that second diagram got in there at the end. Forgive the redundancy. 
  • Upcoming Events

Contact TransPulse

TransPulse can be contacted in the following ways:

Email: Click Here.

To report an error on this page.

Legal

Your use of this site is subject to the following rules and policies, whether you have read them or not.

Terms of Use
Privacy Policy
DMCA Policy
Community Rules

Hosting

Upstream hosting for TransPulse provided by QnEZ.

Sponsorship

Special consideration for TransPulse is kindly provided by The Breast Form Store.
×
×
  • Create New...