Jump to content
  • Welcome to the TransPulse Forums!

    We offer a safe, inclusive community for transgender and gender non-conforming folks, as well as their loved ones, to find support and information.  Join today!

Hair Thinning Help!


KieranD

Recommended Posts

A few months ago I had noticed that my ultra thick head of hair was very much thinning. It's not like what I've seen in most men with thinning hair. I'm not losing hair at the corners with a receding hairline/balding. It's just the top of my head you can see my scalp easily even though my hair is an inch or two long. I don't have much in the way of money or resources but does anybody have an idea of what can be done to stop the hair loss or slow down hair thinning? My hair is kind of curly/frizzy/has a lot of volume is there some sort of way to cut it that would hide the fact that my hair is thinning?

Link to comment
  • Forum Moderator

Kieran, I'm sure that if i had a real remedy i would be a millionaire and perhaps would be able to show my own goldie locks instead of my constant wig. As far as i know there are many promises with few results. HRT and loss of the T might help but that is a big consideration for hair only.

Hugs,

Charlie

Link to comment
Guest sophia.gentry58

Hi Kieran;

Are you aware that getting on HRT will help in stopping your hair lost. Also, there is a medication that primarily is designed to reduce the prostate, it can also be used to help with hair loss; it's called Finasteride.

Sophia

Link to comment

Maybe the T is causing the hairloss, but I am no expert.

A consult with your doctor should help with this question.

Love

Brenda

T and genetics, but me stopping T won't be happening, and fixing genes won't be happening either. So it's not really something that would require talking to a doctor...and doctor visits are expensive.

Link to comment

Unfortunately T causes hair loss in men at a high rate.

Males can get a prescription from their doctor called propecia. It's in the finasteride family, just made for men and hair loss. Plus you can purchase Minoxidil from the store, although it's expensive. These you will have to always take or your loss of hair on the crown will get worse.

Jenny

Link to comment
Guest nomnomnom

The medication mentioned above is for dihydrorestosterone. (DHT).

go to your doctor and request a prescription, they should know why. Apparently also helps to have less body odour.

Link to comment
Guest DianeATL

welcome to the man's world. T and the family tree are factors, You can fight it some with drugs or surgery, but most men just have to come to grips with losing the locks. I know I hate it and tried to stop it early with topical solutions.

Some guys just embrace it as it is what it is, I am still a vibrant person, just without as much hair.

Link to comment
  • Forum Moderator

Finding a good barber can be challenging but they make all the difference and have experience dealing with the problem. Admittedly the cute girl in the sports clip place wasn't good at it although the experience was still enjoyable but after shopping around and some unfortunate haircuts I finally found someone who could make my hair look thick again and not make my cowlicks resemble Alfalfa's from the Little Rascals. Each face is umique as is the texture and growth of hair so advise on cuts etc that work for one person can look awful or ridiculous on someone else. A good barber with a good eye can suit your hair to you whie minimizing problems.

The most negative thing about T has been a total change in my hair. From far thicker and finer than normal to a receding hairline and thinning (though the extreme weight loss also played a role in that because nutrition dramatically and drastically affects hair and the effects can last a very long time). Women don't seem to notice or mind though. And it is a male characteristic.

Johnny

Link to comment
Guest sophia.gentry58

Sorry for the misunderstanding Kieran, you gave no indication that you were on T. There is a new product being advertised for (people) with thinning hair called Keranique. It cost just under $40.00. Hope that helps. :):):):)

Sophia

Edited by ~Brenda~
Removed gender
Link to comment
  • Forum Moderator

I must also say sorry for misunderstanding your use of T.

I hate to say it but it's one of the risks of being a guy. You can't seem to get away with full hair as if you were young unless your genes are nice to you. It never seemed that women seemed to mind, some even seem to like bald men. I hated it but i always wanted to move in another direction. A good barber will give you some help but the general remedies are as far as i know worthless so don't waste your money.

Sorry i don't have any good news on this one.

Hugs,

Charlie

Link to comment
  • Admin

For the good barbers, you pay with money and look good no matter how thin the hair is. With an inexpensive barber, you lose both hair and money. Not much middle ground.

Link to comment

Hair stylist or barber? From my experiences a barber just cuts in whatever way you ask, a hair stylist gives suggestions. Is this generally true?

Link to comment
  • 2 weeks later...

Alright, so I realized that pictures would be easier to communicate. Other people could help out with their suggestions after seeing what my hair actually looks like.

1376789511046_zpsd0f996a1.jpg

So, this is what I have right now...my hair mostly grows outward and looks kinda weird.

These ones are just links to pix since pictures take up a lot of space:

http://i6.photobucket.com/albums/y243/Halfway_to_Nowhere/1376789542440_zps343a75dc.jpg

The top to show how it looks

http://i6.photobucket.com/albums/y243/Halfway_to_Nowhere/1376789553556_zpse3c540a0.jpg

And the side.

Any ideas? Go short? Go long?

Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Who's Online   8 Members, 0 Anonymous, 98 Guests (See full list)

    • MaryEllen
    • Karen Carey
    • VickySGV
    • Maddee
    • Adrianna Danielle
    • Abigail Genevieve
    • Ashley0616
    • MaeBe
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    • Total Topics
      80.7k
    • Total Posts
      768.8k
  • Member Statistics

    • Total Members
      12,039
    • Most Online
      8,356

    Nikki Hart
    Newest Member
    Nikki Hart
    Joined
  • Today's Birthdays

    1. April Marie
      April Marie
    2. daniela...
      daniela...
      (59 years old)
    3. Emily May
      Emily May
    4. Felixr
      Felixr
      (20 years old)
    5. Leann
      Leann
      (56 years old)
  • Posts

    • MaeBe
      Indeed! Most happiest of Birthdays to you!
    • Ashley0616
      Happy birthday @April Marie!
    • April Marie
      Thank for the birthday wishes, everyone!!!   It started great...and then I was rear-ended at a highway construction site this morning. I'm OK. The woman who hit me was shaken - was going fast enough to deploy her air bags. I was at dead stop. Her car had to be towed away. My truck too a hit to the tailgate and the bumper. It seems OK otherwise but I'll know tomorrow when they do the appraisal.   UGH!   Happy Birthday to Me!! :-)  
    • Abigail Genevieve
      "How did it go yesterday? Any trouble in Millville?" He shook his head. "Your biscuits and gravy are great." "Mama's recipe. She taught this girl to COOK." "Uh-huh.  Well, it rained the whole time.  We did the ground breaking in pouring rain.  Your friend, the former head of manufacturing, is now on the Board.  It looks like sunshine down there, he told me, with the missile plant starting up and they re-hired all the people they fired.  Millville Products is as it was.  And the Chinese money is still coming.  That was just an ugly rumor.  Gibson quit, but you knew that." "Missile plant, huh.  Yeah.  Gibson and I may go into business.  But I have been thinking-" "Yeah.  It's been declassified.  I can tell you they made missiles for Navy ships and planes during World War 2. It was shut down after Vietnam.  Several other supporting companies are moving in - paint, electronics assembly, a few others - that support missile production." "Okay."
    • Lydia_R
      That is, it's a great document in that it seems to clearly define things, not that I'm in agreement with it.
    • Abigail Genevieve
      https://www.digitaltransgenderarchive.net/col/cj82k733h   I am now dissatisfied with the thread title because it seems to exclude Catholics and maybe others .  I am not sure what to change it to, so I will fuss over THAT now. 
    • Lydia_R
      I'm on the ballot being mailed tomorrow for an open US Rep seat.  I have both an honorable discharge and an other than honorable discharge.  I told the Navy that I was smoking pot every day right after Y2K.  I told them that while I was in the Navy, I substituted alcohol for marijuana and that the alcohol was making me violently sick.  After 5+ years of that, I said enough is enough and I went back to smoking pot.  I got better and I felt like the quality of my work was improving.   I certainly wasn't the perfect military member, but I excelled at my job and earned a promotion in boot camp.  They drug tested our unit several times after I told them I was smoking pot and I may have never tested positive.  I was opening smoking pot in the Navy for 3 or 4 months before they decided to kick me out.  At my captain's mast, the captain tried to shame me by saying I looked bad in uniform and that I was a disgrace, but all my evaluations said that I looked great in uniform.  I took great pride in looking good in my dress blues and whites.  Sure, I had grown my hair out a little bit (you know, it's not like I became trans in my 50's all the sudden) and I was enjoying some green anodized eye glasses :)   I think that people get very emotional about these kinds of issues when they should be concentrating more on engineering things and work performance.  I think we should take the lead and talk about our professional lives more instead of focusing on this type of politics.  That's a great document and I saved the PDF to my hard drive.  I think we should have more respect for the production that China is doing instead of concentrating on raising a military defense against them.  I personally disliked the hazing rituals in the Navy and think our military would be better off with being more accepting and intelligent.  
    • Abigail Genevieve
      My snarky comment of the morning is that Trump may be the first president sworn into office from a jail cell.  He can't keep his mouth under control.  It's likely he may be serving time for contempt for violating gag orders in January if he keeps it up, and the judges are more than happy to slap fines and imprisonment on him.
    • Ashley0616
    • Abigail Genevieve
      For one thing, this is Rolling Stone, who is convinced that the right is evil and writes articles from that perspective.   For another, he did not call out for eradication.  His answer was lousy, I did not like it, it was ambiguous, but he denied being for eradication of transgender people.   I still don't know what transgenderism is, but I see it as distinct from transgender people.   Conservative TG people need to become politically active and actively dialog and engage with these people..  Dang it.
    • Vidanjali
      Here's some inspiration. Wheels within wheels.   
    • Lydia_R
      Yes, totally.  That's a great story about your math history @Vidanjali!  Wow!   People tend to forget or are not aware of grads instead of degrees and radians, but that is becoming a big deal to me in the idea of coding a trigonometric function.  If you set your calculator to grads and then do the sin of 33.33, it comes up with .4999, you know, pi/6.  The significance here is that by dividing pi/2 (radians) into 100 units (grads) instead of 90 units (degrees), you are now in a base 10 space.  And when we are dealing with decimals (in base 10), and trying to convert them back to ratios, then notating our angles in the base 10 system of gradients seems like it is the key to coding the trigonometric function.   Then again, this has all kind of been a revelation to me the last couple days.  It's fun to combine math with code and I'm looking forward to writing some algorithms around this.  My last job was coding software for a healthcare company and there was no math involved in that and that was a depressing part of that job.  The long hours of that job kind of created a spiritual backlog of wanting to do some math work and I think that energy is busting out right now.
    • Abigail Genevieve
      Went out to get the mail.  I was thinking that I only have dysphoria when I am dressed like a guy as I walked out there, looselimbed and feeling femme.   Get with the program, girl, says I. I am supposed to be dysphoric when I am wearing women's clothing, not the other way around.  In the past I have worn women's clothing like this and after a while said I guess I really don't have GD, switched to male clothing until I gave it up, miserable, and went back.   Dreaming of a nice skirt-suit set.  Looked at them on Amazon.  And a peasant skirt with a nice lacy top.  And a denim skirt, worn with tights, boots and a turtleneck.  A girl can dream.    
    • Vidanjali
      Yes, indeed. It's nice to think about. Calculus allows you to work with an infinitely-many-sided regular polygon which may as well be a circle.    I worked with such ideas within my master's thesis which was a history of the Jordan Curve Theorem. Basically, the theorem states that if you draw a circle on a piece of paper, that the circle separates the paper into two distinct regions - the interior of the circle and the exterior of the circle. Turns out it's not so straightforward to prove rigorously, especially considering all they had to work with at the time the theorem was stated was Euclidean geometry. It took generations and the development of new fields of mathematics before any correct proof was established.
    • Vidanjali
      Aw shucks :) I like your story and similar to you, I had dropped out of high school and was homeless before eventually applying for various aid which led me to taking classes as community college. I'd never completed a math class in high school, but turns out I'm good at it and loved it so much from the very first basic algebra class as community college that I decided I'd become a mathematics professor. And I did! I taught math at the higher ed level for 17 years before resigning due to disability.     True as long as the radius is 1. Else it's a multiple of .524 which is an approximation of pi/6. The entire circumference of the unit circle is 2pi. And one full rotation about the circle is 2pi radian which is equivalent to 360 degrees. 30 degrees is 1/12 of one full rotation. Divide 2pi by 12 and you get approximately .524.     You are correct. The circumference of any circle equals pi times the circle's diameter. Therefore one definition of pi is the ratio of a circle's circumference to its diameter.     Not totally sure what you mean. First note that irrational numbers have infinitely long nonrepeating expansion. And note that the measurements of the sides of right triangles and ratios of those numbers are in arbitrary units of length whereas angle measurements may be in degrees or radians. So, for example, if you ask a calculator what's tangent of 30, and its programmed for radian input, it'll read that as 30 radians which is about 1719 degrees or almost 5 complete rotations.

Contact TransPulse

TransPulse can be contacted in the following ways:

Email: Click Here.

To report an error on this page.

Legal

Your use of this site is subject to the following rules and policies, whether you have read them or not.

Terms of Use
Privacy Policy
DMCA Policy
Community Rules

Hosting

Upstream hosting for TransPulse provided by QnEZ.

Sponsorship

Special consideration for TransPulse is kindly provided by The Breast Form Store.
×
×
  • Create New...