Jump to content
  • Welcome to the TransPulse Forums!

    We offer a safe, inclusive community for transgender and gender non-conforming folks, as well as their loved ones, to find support and information.  Join today!

Another Project to Keep Me Busy


Robin.C

Recommended Posts

  • Replies 107
  • Created
  • Last Reply

Top Posters In This Topic

  • Robin.C

    46

  • Jani

    24

  • Charlize

    13

  • Cyndee

    6

Top Posters In This Topic

Posted Images

Hello. Today's installment of The Wonky Duck Bass.

Now I'm not going to show the disaster I had trying to do the internal hollows. I will just show how they look when I got them right ?

During September all the parts I need for the controls arrived from around the world, so ... I can start to build the control plate up. The six-string string guard will be cut down and new holes and slots done to fit all the pots and switches. Cheaper than buying an original or a piece of pearl plate.

Next is how it looks after I jigsawed and routered the pockets for the pickups and set screwed down the saddles.

With those done I could use the saddles as a reference point to make the template for the neck pocket which got routered out and then finished, for a first attempt it fitted perfect. I'm so happy how that turned out considering it could have meant starting all over again.

Last picture of how all these bits look together.

 

This weekend will be finishing of the pockets for the pickups so the wires can reach where they need to go and maybe start building up the controls. Still waiting on a cutter to finish the last internal bits.

 

How you all like it, I know I do ?

 

Hugs

Robyn

014_Oct2021_001_Inner_Hollows.jpg

015_Oct2021_002_Control_Components.jpg

016_Oct2021_003_Pickups_and_Saddles.jpg

017_Oct2021_004_Neck_Pocket_After Routering.jpg

018_Oct2021_005_How_It_Looks.jpg

Link to comment
  • Forum Moderator

I hope you will record a bit of that beauty to share with us.  It's all coming together.

 

Hugs,

 

Charlize

Link to comment

@Charlize oh yes I'll certainly record something that may or may not be considered music. Probably not as I don't know how to play Bass guitar !

 

A couple of weeks ago I got the control panel wired and it makes sound, it will be interesting to see how my version of the stock Hofner setup works.

 

Enjoy.

Hugs

Robin

019_Oct_2021_Sound.jpg

020_Oct_2021_The Mess.jpg

Link to comment
18 hours ago, Jani said:

A clean soldering job!

@Jani, I try though it's getting more difficult to see what I'm doing as I get older.

I'm also finding my eyes are also seeing slightly different as the HRT effects progress. ? 

 

Hugs

Robin

Link to comment
  • Forum Moderator

I remember the ophthalmologist telling me that he got everybody not just the undertaker.  Age certainly makes seeing things more difficult.  Glad you didn't get any solder on the darmstadtium or the meitnerium.  

 

Hugs,

 

Charlize

 

Link to comment

Yes, @Charlize? You're over my head with those words: "darmstadtium or the meitnerium." They remind me to call the eye doctor. Thanks for that. Also, can't wait to hear that bass.

I've got too many projects here at home, myself, so it's good to see the progress of others. The end is in sight!

cheers,

Davie

Link to comment
  • Forum Moderator

@Robin.C Haven't looked lately - but just did - your new bass is looking amazing.

Link to comment
9 hours ago, Charlize said:

Glad you didn't get any solder on the darmstadtium or the meitnerium

Nobody wants to get solder on their darmstadtium  .... ??

@Davie the end might be in sight however it's still a long way off and i'd need a telescope to see it ?

Thank you @Shay hopefully I can learn enough between now and when I finish it to be able to play a few notes on it.

 

I also got my fancy strap for it form the US the other day. Let's just say it will really suit the Bass and it was worth the wait and monies.

 

Also the ball nose cutter I was waiting for has arrived. So this weekend I can try and destroy the front and back of the Bass ?

 

Hugs

Fiona

Link to comment
  • 3 weeks later...

Hello, it seems my initial post disappeared; so this is repost. Not the same words of course since it was a while ago and i forgot what i wrote.

First photo is the body prior to routing the top and rear faces. Second photo is routed bodies. Ball nose cutter did a great job and then i just used a chisel to remove the excess.

Next up the final glue up of the front and rear halves.

Clamp City.

Finally we have the tailpiece and strap which i realised i needed to fit before gluing the bodies together as I'd lose my center-line reference point and you don't want your tailpiece off center ... LOL

 

I need to get the other photos ready. So later this week you will see the coppering and conductive spray pics. As long as it works of course.

 

Hugs

Robin

021_Oct_2021_Internal Body_a.jpg

022_Oct_2021_Internal Body_b.jpg

023_Oct_2021_The gluing.jpg

024_Oct_2021_Strap Mount.jpg

Link to comment
  • Forum Moderator

Soon you will have to post a video of it playing!

 

Hugs,

 

Charlize

Link to comment
  • 2 weeks later...

Hello TP. Bass update. So first up I had knee surgery hence it's been awhile since last lot of photos.

First up is the brass plate to brace the back of the pearloid control panel. Next is the hole I needed to drillfor the tailpiece ground. Then the inner cavities primed (white) and coppered. Next is the carbon conductive paint to give that extra bit of RF shielding and make sure everything is connected in a circuit to ground. And lastly the final glue up.

025_Nov 2021_Brace for controls.jpg

026_Nov 2021_hole for tailpiece ground.jpg

027_Nov 2021_inner cavities.jpg

028_Nov 2021_conductive paint to add another layer of shielding.jpg

029_Noc 2021_final glue up.jpg

Link to comment

Here we go for another lot of pictures.

Yep that's me trying the bass out for size and weight. It is a little heavy. However there is a bit of carving to be done to the front and backs so it may lose a small amount of weight.

Certainly wont be any neck dive ?

Lastly are some pics of the trial fit of everything and a last photo before I pulled it all apart to do the finishing.

Enjoy ..

Hugs

Robyn

030_Noc 2021_test.jpg

031_Nov 2021_systems check.jpg

032_Nov 2021_last shot before final finishing.jpg

Link to comment

Onto the last stuff.

Binding ... omergerd how blumin' difficult. Acrylic glue and lots of blue tape. It worked but sheesh.

Finally I have to admit a stuff up.

When I clamped it together for the final glue up I didn't see that the body pieces had slide a little so i ended up with 1/8" (3mm) gap and ledge on opposite sides. Not good.

The only way I can fix it now is to fill the gaps and re-profile the offending areas hence the last picture.

It means as I can't afford a set of proper binding slot cutters no binding slot on the back so it will just get a 1/2" (12mm) rounded edge.

So there you go all up to date.

It's going to take awhile to make this MDF and filler nice and smooth plus do the carving of the front and back faces. I am hoping to get it to a point where I can start painting it during my Christmas holidays.

Wish me luck.

 

And big HUGS to everyone.

Robyn

033_Nov 2021_gluing binding on.jpg

034_Nov 2021_Binding closeup.jpg

035_Nov 2021_where we at filling.jpg

Link to comment
  • Forum Moderator

You have certainly been working hard and it shows.  I particularly love seeing the bear playing base on the couch.  Enjoy! its going great.  New year concert?

 

Hugs,

 

Charlize

Link to comment
  • Forum Moderator

I love the shape you've given this Bass, voluptuous!  I've been thinking this was going to be heavy as its made with MDF.  Could you have made the routs larger without compromising the rigidity of the sides and faces?   What is the unfinished weight?  

 

Jani 

Link to comment
3 hours ago, Jani said:

What is the unfinished weight?

About 4.5lbs at the stage ?

I knew it would be heavy. Probably a bit portly for lugging around to gigs. If I was a musician, and I'm not ?

 

Sadly I was having troubles with the sides flexing at this thickness when I was routing the edges. I've learnt a lot with this build. I had no idea how to build a guitar when I started.

Does it show ? ?

 

I've already got ideas for a Fender Bass project that I want to use the parts I bought for this one that I couldn't use this time around. 

 

Methinks I might end up making a few basses over the next couple of years. They take up a lot less space than my car projects ?

 

Happy Saturday everyone ?

 

Hugs

Robyn

Link to comment
  • Forum Moderator

Wow, at 4.5 pounds that is quite light for a bass. My short scale Hofner Viola Bass (think Beatle Bass) is 5lbs.  My Yamaha is 8.5lbs. which is typical for most Basses.  A good strap is a must. 

 

I agree about taking up less space!   I was up to 12 at one time and except for the daily drivers they were all kept inside.  I'm down to three cars and a truck now.  I keep my guitars and basses in one room now!  

That seems like a good project.  I've got all the woodworking tools but I'm not sure I have the desire at this point.    

 

Cheers, 

Jani

Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Who's Online   8 Members, 0 Anonymous, 118 Guests (See full list)

    • Susie
    • Rebecca Y
    • Ivy
    • Carolyn Marie
    • Maddee
    • MaeBe
    • VickySGV
    • Abigail Genevieve
  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    • Total Topics
      80.7k
    • Total Posts
      768.4k
  • Member Statistics

    • Total Members
      12,029
    • Most Online
      8,356

    Selkimur
    Newest Member
    Selkimur
    Joined
  • Today's Birthdays

    1. Anyatimenow
      Anyatimenow
      (23 years old)
    2. Aria00
      Aria00
    3. Ava B.
      Ava B.
      (24 years old)
    4. Claire Heshi
      Claire Heshi
    5. CrystalMatthews0426
      CrystalMatthews0426
      (41 years old)
  • Posts

    • Ivy
      Just some exerts regarding subjects of interest to me.
    • Ivy
      Yeah.  In my early teens I trained myself out of a few things that I now wish I hadn't.
    • Abigail Genevieve
      I was thinking in particular of BLM, who years ago had a 'What We Believe' section that sounded like they were at war with the nuclear family.   I tried to find it. Nope.  Of interest https://www.politifact.com/article/2020/aug/28/ask-politifact-does-black-lives-matter-aim-destroy/   My time is limited and I will try to answer as I can.
    • Ivy
      Well, I suppose it is possible that they don't actually plan on doing what they say.  I'm not too sure I want to take that chance.  But I kinda expect to find out.  Yet, perhaps you're right and it's all just talk.  And anyway, my state GOP is giving me enough to worry about anyway. I remember a time when being "woke" just meant you were paying attention.  Now it means you are the antichrist. I just don't want the government "protecting" me from my personal "delusions."
    • MaeBe
      1.  I think there are some legitimate concern.   2. Thoroughly discussing this will consume many threads.   3. I disagree partially with @MaeBe but there is partial agreement.   4. The context includes what is happening in society that the authors are observing.  It is not an isolated document.   The observation is through a certain lens, because people do things differently doesn't mean they're doing it wrong. Honestly, a lot of the conservative rhetoric is morphing desires of people to be treated with respect and social equity to be tantamount to the absolution of the family, heterosexuality, etc. Also, being quiet and trying to blend in doesn't change anything. Show me a social change that benefits a minority or marginalized group that didn't need to be loud.   5. Trump, if elected, is as likely to spend his energies going after political opponents as he is to implementing something like this.   Trump will appoint people to do this, like Roger Severino (who was appointed before, who has a record of anti-LGBTQ+ actions), he need not do anything beyond this. His people are ready to push this agenda forward. While the conservative right rails about bureaucracy, they intend to weaponize it. There is no question. They don't want to simplify government, they simply want to fire everyone and bring in conservative "warriors" (their rhetoric). Does America survive 4 year cycles of purge/cronyism?   6. I reject critical theory, which is based on Marxism.  Marxism has never worked and never will.  Critical theory has problems which would need time to go into, which I do not have.   OK, but this seems like every other time CRT comes up with conservatives...completely out of the blue. I think it's reference is mostly just to spark outrage from the base. Definitely food thought for a different thread, though.   7. There are groups who have declared war on the nuclear family as problematically patriarchal, and a lot of other terms. They are easy to find on the internet.  This document is reacting to that (see #4 above).   What is the war on the nuclear family? I searched online and couldn't find much other than reasons why people aren't getting married as much or having kids (that wasn't a propaganda from Heritage or opinions pieces from the right that paint with really broad strokes). Easy things to see: the upward mobility and agency of women, the massive cost of rearing children, general negative attitudes about the future, male insecurity, etc. None of this equates to a war on the nuclear family, but I guess if you look at it as "men should be breadwinners and women must get married for financial support and extend the male family line (and to promote "National Greatness") I could see the decline of marriage as a sign of the collapse of a titled system and, if I was a beneficiary of that system or believe that to NOT be tilted, be aggrieved.   8.  Much of this would have to be legislated, and this is a policy documented.  Implementation would  be most likely different, but that does not mean criticism is unwarranted.   "It might be different if you just give it a chance", unlike all the other legislation that's out there targeting LGBTQ+ from the right, these are going to be different? First it will be trans rights, then it will be gay marriage, and then what? Women's suffrage?   I get it, we may have different compasses, but it's not hard to see that there's no place for queer people in the conservative worldview. There seems to be a consistent insistence that "America was and is no longer Great", as if the 1950s were the pinnacle of society, completely ignoring how great America still is and can continue to be--without having to regress society to the low standards of its patriarchal yesteryears.    
    • awkward-yet-sweet
      Cadillac parts are pretty expensive, so repairing them costs more.  But they don't seem to break down more than other makes.  Lots of Lincoln models use Ford cars as a base, so you can get parts that aren't much more expensive.    My family has had good luck with "Panther platform" cars.  Ford Crown Victoria, Mercury Marquis, Lincoln Towncar or Continental.  4.6 V8 and 5.0 V8.  Reasonable fuel economy, and fairly durable.  Our county sheriff's office was running Chargers and SUV's for a while, but has gone back to older Crown Victorias for ease of maintenance.  GF rebuilds them here.  But they are getting more scarce, since the newest ones were made in 2011.    1992-1997 years were different than the later years.  1998-2001 they did some changes, and apparently the best years are 2003 to 2011.  Check Craigslist, and also government auctions.  GF has gotten a lot of them at auction, and they can be had in rough-but-running shape for around $1,000.  Ones in great shape can be found in the $5,000+ range.  Good for 200,000 miles without significant rebuilding.  Go through engine and transmission and electrical systems, and they go half a million.    Some Chrysler models are OK.  The 300 mostly has the same engines as the Charger and Challenger, so parts availability is pretty good.  But they tend to get timing issues.  The older Chrysler Sebring convertibles were pretty reliable, sometimes going 200,000 miles without tons of problems, although after that they were pretty much worn out. 
    • Abigail Genevieve
      I think I have read everything the Southern Baptists have to say on transgender, and it helped convince me they are dead wrong on these issues.  They can be nice people.  I would never join an SBC church.
    • Abigail Genevieve
      You come across as a thoughtful, sweet, interesting and pleasant person.    There are parts of this country, and more so the world, where evangelicals experience a great deal of finger wagging.
    • awkward-yet-sweet
      It has been an interesting experience being in a marriage in a Christian faith community, yet being intersex/trans.  I stay pretty quiet, and most have kind of accepted that I'm just the strange, harmless exception.  "Oh, that's just Jen.  Jen is...different."  I define success as being a person most folks just overlook. 
    • awkward-yet-sweet
      Well, I live in an area with a lot of Southern Baptists, Evangelicals, etc...  We've experienced our share of finger-wagging, as the "standard interpretation" of Scripture in the USA is that the Bible only approves of "one man, one woman" marriage.  My faith community is mostly accepted here, but that has taken time and effort.  It can be tough at times to continue to engage with culture and the broader population, and avoid the temptation to huddle up behind walls like a cult.    Tolerance only goes so far.  At one point, my husband was asked to run for sheriff.  He declined, partly because an elected official with four wives would have a REALLY tough time.  (Of course, making way less than his current salary wasn't an option either). 
    • Abigail Genevieve
      My bone structure is far more female than male.  I can't throw like a guy, which has been observed by guys numerous times, and moving like a woman is more natural.  It just is.  I'm not going out of my way to act in a fem. way, as you say, but I am letting go of some of the 'I am not going to move like that because I am a guy' stuff I have defensively developed.  The other breaks through anyway - there were numerous looks from people at work when I would use gestures that are forbidden to men, or say something spontaneously no guy would ever say.   At one point, maybe a year or more ago, I said it was unfair for people to think they were dealing with a man when they were actually dealing with a woman.    Girl here.  'What is a woman' is a topic for another day.
    • Willow
      Mom, I’m home!  What’s for lunch?   Leftover pizza .   ok.    Not exactly our conversation but there is truth in the answer.     @KymmieLsorry you are sick. Feel better soon.   Girl mode, boy mode no mode, not us. Nothing functional for either of us.   anyone here have or had a 10 year old (plus or minus) Caddy, Lincoln or Chrysler?  How was it?  Lots of repairs?  Comfortable seats? Anything positive or negative about it?  I need to replace my 2004 Ford Explorer Eddie Bauer, it’s eating $100 dollar bills and needs a couple of thousand dollars worth of work and that doesn’t even fix the check engine code.  Obviously, it isn’t worth putting that kind of money into a 20 year old car with a 174 thousand miles.   Willow
    • Ashley0616
      Oversized pink shirt, pink and black sports bra
    • Abigail Genevieve
      I think you mean the worst possible interpretation of 2025 situation.  Keep in mind that there are those who will distort and downright lie about anything coming from conservatives - I have seen it time and time again.  It's one of the reasons I want to read the thing slowly and carefully.  They want you to be very, very afraid. 
    • Abigail Genevieve
      Here is where the expectation is that the stereotypical evangelical comes in finger wagging, disapproving and condemning.    Not gonna do that.   You have to work these things out.  Transgender issues put a whole different spin on everything and God understands what we are going through. I have enough trouble over here.  :)
  • Upcoming Events

Contact TransPulse

TransPulse can be contacted in the following ways:

Email: Click Here.

To report an error on this page.

Legal

Your use of this site is subject to the following rules and policies, whether you have read them or not.

Terms of Use
Privacy Policy
DMCA Policy
Community Rules

Hosting

Upstream hosting for TransPulse provided by QnEZ.

Sponsorship

Special consideration for TransPulse is kindly provided by The Breast Form Store.
×
×
  • Create New...